How to Setup the Kreg Rip Cut Guide

How to set up the Kreg Rip Cut Guide completely is the topic of this video. A previous video talked about buying the relatively inexpensive Kreg Rip Cut Guide as opposed to buying an expensive track saw kit, but this is more about the detailed setup.

🔴 Subscribe for more DIY Boomers Content:

🔴 Share this video with a friend:
Kreg Rip Cut Guide - Complete Setup

✅ - Links -

Kreg Rip-Cut Circular Saw Guide

PORTER-CABLE 7-1/4-Inch Circular Saw, Heavy Duty Steel Shoe, 15-Amp

Delta 36-T30T3 Fence System

Leecraft CR-1 Zero Clearance Table Saw Insert

ProGrip 50” Straight Edge Guide Clamp

- As an Amazon Associate, I earn from qualifying purchases

✅ - Videos you may be interested in -

Kreg Rip Cut Guide & Porter Cable Circular Saw - Alternative to Expensive Track Saw Kits

Crosscut Plywood with ProGrip 50” Straight Edge Guide Clamp

DIY Mobile Workbench / Tool Cart

Upgrade Craftsman Rip Fence to Delta 36 T3 Rip Fence

Install Leecraft CR-1 Zero Clearance Table Saw Insert

Building a Bathroom Vanity from Start to Finish

Complete DIY Bathroom Remodel Start to Finish @DIY Boomers

DeWalt 735X Thickness Planer Unboxing & Setup

——

🔵 Bathroom Remodel Playlist

🔵 John Deere S130 Lawn Tractor Playlist

🔵 Other Stuff

🌐 For business inquiries, contact us at:

#KregRipCutGuide #HoToSetupTheKregRipCutGuide #PorterCable15AmpCircularSaw

[btreese]

I found it helped to make a test cut with my blade depth thinner than what I was cutting. Then, after making the cut, with the saw off, I reversed the saw over the cut I just made and checked to see exactly where the hairline marker was. This way I know for sure where the line represents in my cut.

[waydown]

Thanks for posting this, most appreciated! Once I set up my Kreg Rip Cut Guide I used it to cut down 6 interior doors which I was installing. Each of these doors needed to be cut down in size, from 2.5 to 3 inches. The Kreg guide was great for doing this. I'm not sure why some people are so negative about this Kreg guide, it only took me 5 minutes to set up, with absolutely no problems and the result was perfectly straight cuts. I purchased my Kreg Guide at Home Depot and on their site it has a 4.2 out of 5 rating. Thanks again for your video

[phonghs]

Appreciated good and informative guide, just bought one the these similar guides. Cheers

[DIYGene]

Thanks for the video. I am looking at one of those.

[twillsol]

So I just followed your instructions and they are the best that I've seen on here so far, thanks! I was wondering if my circular saw should be lifting up a little once attached to the sled? I'm not able to get it completely flat

[enterprise]

I have a brand new one I'll sell ya!.. Bought mine last week, spent an hour setting it up for my DeWalt 6.5 saw to cut a half inch sheet of Ply. I HATE this thing! Clamped on my 4 foot level and made a BETTER cut than this rip cut guide did.

[ingolfurhreiarsson]

Total junk. Tried it once and consequently threw it away... This Kreg cpmpany should be liquidated.