Bambu P1 Maintenance You Should Be Doing Every Month

You should be doing your printer maintenance just like I should be. Clean, replace printer parts, and clear your AMS's stuck filament.

0:00 Intro
0:29 Removing The AMS
1:04 Wash Your Build Plate!
1:22 Vacuum The Insides
1:40 Replace Nozzle Wiper
2:08 PCBWay
2:31 Replace Filament Cutter
3:11 Remove Hot End and Extruder
4:12 Clean Extruder
6:56 Cleaning The Guide Rods
8:03 Grease Z Axis Lead Screws
8:44 Blowing Out The Fans
9:21 Clearing Stuck Filament From AMS

[Walto]

This was really useful and well timed Youtube recommendation. Just last weekend I was searching how and when to do maintenance for my P1S. Great tips and clear instructions.

[Killa_Prints]

Great recap. Nearly the same routine I personally used to keep my X1C running for 3 years.

[DigitalDoyle]

Outstanding info! Don't know why I've never seen you in my yt feed before, but definitely liked and subscribed and saved for future reference. Great job! Very much appreciated!
👍😎✌

[billytalentrocks]

the extruder gears should be sqeaky clean on the filament grip part. and lube on the rod tips where they socket into the casing/bearing, and the big yellow gear and the other gear that meshes with it.

[AmphsStuffnThings]

Came here for the maintenance info, but also learned that "5 gallon bucket savers" exist.. Off to print some..

[sunz]

Don't let the Isopropyl alcohol touch the axis belts. You'll dry out the rubber resulting in cracks, stretch and slip.

[peterpeter]

the first time i had to remove extruder, the thing that surprised me most is how tiny all the parts are. being 6'1 and an uto tech i have large hands so i had to be extra careful ! LOL and dont plug your part fan backwards it wont work LOL ! happened to me PS theres an updated file that make the round humidy meter level ! had the same issue

[ericb]

Nice video but I think your nozzle is bent.

[shouryaverma]

I was about to buy a bambu lab p1s printer but now I’m confused after seeing all the rumours…I think the bambu lab responded positively but should I still avoid it as no one recommending it?? Please suggest( if not please suggest me other printer of same or better print quality)