How to Replace Front Driver Side CV Axle Assembly 2009-2014 Nissan Maxima

Buy Now!

This video shows you how to install a new front driver side CV axle in your 2009-2014 Nissan Maxima. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This process should be similar on the following vehicles:
2009 Nissan Maxima
2010 Nissan Maxima
2011 Nissan Maxima
2012 Nissan Maxima
2013 Nissan Maxima
2014 Nissan Maxima

Tools you will need:
• 18mm Wrench
• Metal Cutters
• Pliers
• 3/8 Inch Impact Gun
• Copper Anti-Seize
• Cotter Pin
• Safety Glasses
• Drain Pan
• Hammer
• Rubber Mallet
• Small Hook

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[SusanMoon-mtxw]

You are a good mechanic which sometimes mean your a great person?🤔👊👊

[RM-iuey]

How about the floating ring that goes on the spline at the end does it have to be lined up?

[gruvygraphics]

my cv axle is not fitting flush with the housing, there's like a half inch gap . is this normal?