How to Install Air Compressor Hose Fittings

A demonstration about changing and installing hose fittings for an air compressor.

Donations to TryAdaptLearn via Ko-fi are greatly appreciated

#hosefittings #compressorfittings #aircompressor #diy #fittings #airhose

The fittings seen in this video are 1/4 in.

Additional video: Identify and select air compressor hose fittings

Thank you for your support:

Your donations will help to support TryAdaptLearn

View other videos on this channel.
Comments and likes are welcomed and will also help support this channel.

Our other channels:

Disclaimer:
This video is for demonstration and entertainment purposes only. All viewers must take responsibility for their own choices and actions. The creators of this video and anyone recorded in the video are not responsible and do not assume any responsibility for all purchases, damage, injury, death or dismemberment resulting from the performance of any operation in this video. Use the proper parts, specifications and safety procedures for your own application.

[Eighteenxray]

Ignore the complainers, I looked for a video just to confirm the simplicity of connecting the fittings and your video was quick and short and showed a good amount.
Those complainers probably wanted their hands held to understand male and female ends or something.

[larrym]

It has been many years since I had to change out the ends to the hose and I could not remember if I used Teflon tap or something else. I also forgot about the different types of fittings, ie the industrial and std.. This video was a great refresher. Thanks so much!!!

[adeyemibabatunde]

Reduce video speed by clicking on the 3 vertical dots on the right upper corner in the you tube video viewer. Change video speed in the dropped down menu-play back speed. Pick .75x, .5x etc

[ravenmooore]

Please let me know how far do I have to rotate? I see like 2-3 threads left but it’s really tight on my tool, I wonder if I should force to rotate it more ?

[J_PIK]

All I needed was the Teflon tape. My compressor wouldn't go above 165 PSI because the air kept leaking out of the threads.

[Fredengle]

wanted to ask you your thoughts please I tried to use a 1/8 hose repair kit with barb type it seemed that the barb was loose before I was going to panic I tried as a remedy wrapping teflon tape around the barb before I put a clamp it seems it became secure now and does not come apart after I put the teflon tape and got it clampped ?? Ideas please thank you !!!!

[rwill]

Yes show how to push hose onto the coupling

[jamespuckett]

Thank you for flying through this video

[epsiloneridani]

I installed min but, I can hear a little bit of air coming out of the fitting. Could this just be the Teflon tape?

[leodaza]

Straight and to the point. Excellent video, wish I'd seen it like 4 hours ago XD

[francesdavis]

Super useful. Thank you. Will look for more help on you YT

[ethancalilung]

Sir, i recently bought a milwaukee air compressor and i dont know what fittings to buy for it … please help .. what does it look like

[Davi-did]

I watched the video in hopes of seeing how to connect to the tube itself (as opposed to a threaded adapter). While I haven't found a video for it, I ended up softening the tip of the tube with a heat gun and pressing the brass piece into it.

[jhayden]

You just showed people how to screw something on lol. Try showing them how to attach it to the bare hose

[ceknott]

Hello. A bit too fast for me as I do not know what to buy or how to fit my equipment

[brandonbaker]

Too fast. And you didn’t show how to attach it to a bare hose. Screw threaded part 1 into threaded part 2 is self explanatory

[asdfjkl]

This video should have been called "How to jimmy rig air hose fittings".

[pastuh]

Whats the point to explain at such speed? :))
Edit: ok, I see same question everywhere.. :E

[MrGlock]

You pointed to automotive and industrial, I think they were supposed to be opposite. Maybe not.

[rambabusen]

Air compressor car connector Mujhe kharidna Hai