No Power? Electric Range Troubleshooting | Repair & Replace

preview_player
Показать описание
Oven and stove won't turn on? In this episode of Repair & Replace, Vance shows how to troubleshoot an electric range that doesn't have any power. First we'll cover the initial checks and reset the breaker. Then we'll test the 240V outlet for power. Finally we'll test the power cord for continuity.

This applies to Whirlpool, Frigidaire, Kenmore, Maytag, General Electric, and Samsung ranges.

___________________________

00:00 Intro
00:33 Initial Checks
01:43 Reset the Breaker
02:15 What You'll Need
02:25 Getting Started
03:22 240V Outlet Testing
04:34 Power Cord Testing
06:13 Wire Harness Checks
06:59 Finishing Up

___________________________

AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.

Connect with AMRE Supply
Рекомендации по теме
Комментарии
Автор

Did this help you fix your electric range? Let us know in the comments!

AmreSupply
Автор

The clear concise and calm answer that I needed. Thank you

carlwilson
Автор

Well presented! Appreciate the step-by-step instructions Vance! Blessings!

rworksllc
Автор

Excelent video even for other language speakers. Congratulations

claudiaugaz
Автор

When testing on power sockets, it is always a good idea to plug the neutral first (the black probe) and THEN the hot (the red one). On your video (3:30) you are doing the opposite.

teodorgeorgievbg
Автор

Greetings. Thank you for your videos.
I have a GE Profile PCB909DR1WW glass top that is probably around 10 years old at least and intermittently will not have ALL the elements working. They could go dead for a few days and without doing anything, they will start working again. The lights will come on, but no heat. Currently, it is working and all my connections seem intact with no wire issues that I can see. Ohms testing seems good. Any ideas as to what is causing this issue that has happened twice now? Obviously, will test again should it fail again, but if you have any leads I can address now or then would be appreciated. Thanks.

emsteph
Автор

Question, I am getting 120v on each hot lead when I test them off of the busbar. When I connect them to the busbar I am not getting any power. The busbar reads 240v on one side and 0 on the other side. Any idea what the problem is?

dmax
Автор

Wow this channel is looking pretty cool 😎

marqueswilsonn
Автор

Thx it really worked after I reset the Breaker !

老海同学
Автор

I HAVE 2.6 ACROSS THE BLACK AND RED WIRES OF MY PLUG BUT between .5 and 1 on the neutral. Is this an issue? Thanks

lambertbest
Автор

i noticed yours has a four wire outlet, my home has a three wire outlet (OLD outlet) and my issue is that the newly purchased Range is not getting enough power or any power. Im wondering if I need to swap out the old outlet for a newer one.

southernfriedmedia
Автор

I have a fridiare electric gallery stove. this is our second stove same model, same problem, oven does not work, however, at times the control board will come on and stay on for half day, one time it stayed on for 2 weeks. then back to its normal state of no worky, replaced wiring harness, control board and relay board. even my spare control board and relay parts didn't work, i believe the electric coming from the outlet is correct

carlkrockenberger
Автор

Anyone know why oven lights won’t work C970 is the Model with ECM everything works oven lights blew now won’t work no power
Any help

Moonshadow
Автор

What does it mean if from neutral to red you have 156 volts and from neutral to black 50 volts? Essentially voltage from neutral to hot is not the same

LetsFish
Автор

I get no heat anywhere stovetop or oven. But, i do have partial power, as the orange light still comes on as when i turn the burner knobs...The light doesn't come on however when I turn the oven knobs....

This is an older coil top stove(if that matters)

erics
Автор

What if your terminal block melted at the red wire?

CHUDWICK
Автор

Good day I have oven kelvinator and breaker trip from Time to time and today I see the oven and refrigerator connected in one breaker 30A

عبدالرحمنتنبكتي
Автор

Where are you located ?
I am in gta and was hoping if you could teach us your wisdom
Is there any school that you are teaching? Or any contact number?

binaymetin