Oven Control Board | Repair & Replace

Oven display not working? In this episode of Repair & Replace, Vance shows how to replace the control board in an electric oven. The control board is the brains of the oven and controls the power to each oven component. A faulty control board can result in problems with the oven heating, self-cleaning issues, a blank display or an unresponsive keypad. This video shows how to access and how to replace the oven control board.

Oven

This applies to Whirlpool, Frigidaire, Kenmore, Maytag, General Electric, and Samsung ranges.

___________________________

00:00 Intro
01:06 What You'll Need
01:51 Getting Started
02:55 Control Board Removal
03:50 Control Board Installation
04:35 Finishing Up

___________________________

AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.

Connect with AMRE Supply

[AmreSupply]

Did this video help you fix your oven? Did you run into any problems? Let us know in the comments!

[timeforthinkers]

The calm, lucid delivery made me confident I can do this repair. Many thanks. You rocked it.

[rayl]

Thank You. Our oven shuts off by itself while in operation. A sharp blow to the area around the bake switch brings it back on. You have given me the knowledge of where to first look for a loose connection or, if that doesn't work, to go ahead and replace the control board.

[fredhawley]

Thanks for the excellent video. This made it easy to diagnose the problem and fix my oven! Also thanks to Karen at the Richmond, BC store for the advice to use a blow dryer to heat up the overlay to make it easier to peel off.

[johng]

Thanks in a million. Great content. Awesome. Very well explained. I couldn't find this explanation--simply put anywhere else. Great teachers are hard to find. Grade: A++💥

[swissarmywife]

Did what you said now my oven is working. 🤩 Thanks

[bluemtn]

Thanks your video helped me to replace the control board and repair our ge range .In our case a mouse had gotten in the electric burner control and had grounded out. The wires had checked out good so I examined the control board and it was discolored but barely visible but that was the problem. So we ordered the part and replaced . Thanks again

[MA]

Really helpful and thank you. I have a doubt. The first slot (connecting to yellow wire fried in my stove) . It is the part which you are removing at 3:06 in the video. So my doubt is can I detach that part and replace it? @Amresupply

[labellefleur]

Thanks for the video. Our oven is displaying F1 E0 error code. The burner stay on high even when the button is on low. We don't know what to do at this point.

[Lunchpgap]

is there a way to reinforce the plastic bevel/bracket where the screws go into? i think after years of pushing on the board, the plastic will eventually break against the metal screws.

[KendellNoel]

Could you change or convert your control board to a traditional knob on your Amana stove?

[virgomrs]

How can the clear plastic covering the buttons be replaced? Mine is peeling and looks awful.

[alejandrachavez]

My control board works, but the base itself is broken. The part where the screws get secured. Is this something i can buy separately? Ordo i have to buy the whole control board?

[jamesmoncrief]

We've had to replace the control board on our Tappan oven three times in the past 24 months, each time we've lost power due to storms. Is there any way to protect the board from blowing when we lose power?

[nycbass]

What is the best way to remove the white connector on the bottom of the control board?

[mh]

Would a faulty control board cause the oven to go into clean mode on its own? After putting food in the oven set at 375, about 15 minutes in, the oven beeped a few times and went into what looked like clean mode. It said clean on the screen and none of the buttons to control the oven worked. It would not turn off even. I had to turn off the breaker. Now everytime I turn the breaker on the top heating elements come on, without me actually turning the oven on.

[beverlys]

I have a Whirlpool stove. Everything works. The display panel keeps showing the stovetop is on and hot. I recently had to replace a switch for the stovetop but I can seem to figure out how to get the display to reset itself. The surface of all eyes are cold to the touch it is a smooth top stove. it is just about a year ideas

[onlymyrooles]

If the main board is discontinued, are they repairable? So frustrating 😢 I have a GE dual oven less than 10 years old but discontinued contol board. I hate to throw the whole stove out, it’s still in mint shape.
Are there companies that can just fix the boards?

[rwilson]

I have a Samsung oven/range around 7 years old, NE59J3421SS/AA, and it will not heat up to the correct temp (on the low side by 200+ degrees when the alert signal first goes off). When I let it run, over time (45 min) it gets within 25 degrees or so but still low. I've tested the thermal sensor and heating elements which are within normal ohm specs. I tested the control board with a voltmeter on the two wires feeding to the baking element. When I turn on the bake mode, after waiting a minute of starting, the voltmeter reads 56 volts and then climbs to 235 volts and back down to 56 volts but never stays at any one voltage for more than 5 seconds or less. As the voltage continues to rise and fall (pausing at a few different voltage levels), I hear the relays chatter. Does this problem sound like a control board? Thank you.

[terimccollum]

How about if the light on the control board isnt working... I changed the bulb out and it won't turn off so I put the old bulb back on til someone takes a look