filmov
tv
Wetland CNC Router Part 11 - Base Bottom Shelf + Gantry Installed
Показать описание
The video is a mashup of me getting the base floor cut and put into the CNC and also an assembled painted gantry. The machine is coming along nicely now. I will start bolting up the rest of the mechanical and then start wiring it up in the videos that follow this.
Not to much longer before its alive.....
Not to much longer before its alive.....
0:04:37
Wetland CNC Router Part 11 - Base Bottom Shelf + Gantry Installed
0:07:40
Wetland CNC Router Part 13 - Final Assembly Z aixs
0:07:27
Wetland CNC Router Part 12 - Installing Z Axis + Gantry XBrace
0:09:54
Wetland CNC Router Part 18 - Building The Router Mount
0:03:05
Wetland CNC Router Part 10 - Spraying the Steel
0:08:05
Wetland CNC Router Part 15 - Soldering D Sub Connector (DB9) to Stepper Motor
0:04:18
Wetland CNC Router Part 22 - Limit Switch Installation and Wiring
0:04:08
Wetland CNC Router Part 2 - Mechanical Parts on Display
0:04:45
Wetland CNC Router Part 19 - Mounting the Monitor
0:09:35
Wetland CNC Router Part 9 - Gantry Building Expanded + Revisions
0:05:46
Wetland CNC Router Part 21 - E-Chain Install
0:04:18
Wetland CNC Router Part 16 - Bench Test Stepper Motors, G540 and Mach3
0:04:44
Wetland CNC Router Part 17 - IT'S ALIVE! ((thunder clap))
0:03:05
CNC Router - Part 11
0:02:14
Wetland CNC Router Part 20 - Xbox 360 Controller Upgrade
0:10:22
Wetland CNC Router Part 8 - Building the Gantry Risers
0:00:31
CNC Router Build 11 - Stepper Motor Issue
0:08:11
Wetland CNC Router Part 7 - Spraying Color
0:11:34
Multicam CNC Router Pinion Shaft Repair Part One
0:01:00
CNC router table test fit
0:06:53
Wetland CNC Router Part 23 - Thoughts on some revisions
0:03:35
Installing X-axis Limit End-Stop Switches On CNC 3020 Router
0:07:49
Installing dual belts on Ooznest OX CNC - X-Axis
0:00:34
CNC Router DIY Machine - solving gantry design problems
Комментарии