filmov
tv
Wetland CNC Router Part 2 - Mechanical Parts on Display
Показать описание
Overview of the mechanical parts that are going to be used. Also the Z axis (router lift) is put together so that it can be demonstrated. Lastly, the steel rails are shown being drilled with a cobalt steel drill bit.
0:04:08
Wetland CNC Router Part 2 - Mechanical Parts on Display
0:08:12
Wetland CNC Router Part 3 - Building the Base
0:07:43
Wetland CNC Router Part 1 - Concept and Overview
0:04:18
Wetland CNC Router Part 22 - Limit Switch Installation and Wiring
0:04:37
Wetland CNC Router Part 11 - Base Bottom Shelf + Gantry Installed
0:02:14
Wetland CNC Router Part 20 - Xbox 360 Controller Upgrade
0:05:46
Wetland CNC Router Part 21 - E-Chain Install
0:00:25
Grooving UIT rail on CNC
0:07:40
Wetland CNC Router Part 13 - Final Assembly Z aixs
0:08:57
Wetland CNC Router Part 4 - Electrical Parts and Base Wrap Up
0:06:14
Wetland CNC Router Part 6 - Installing the Steel Rails Plus First Look at R&P
0:04:18
Wetland CNC Router Part 16 - Bench Test Stepper Motors, G540 and Mach3
0:10:22
Wetland CNC Router Part 8 - Building the Gantry Risers
0:04:44
Wetland CNC Router Part 17 - IT'S ALIVE! ((thunder clap))
0:11:05
RCNC X2 Router 06: Frame Assembly part 2
0:09:54
Wetland CNC Router Part 18 - Building The Router Mount
0:06:29
Wetland CNC Router Part 5 - CNC Frame (X Axis)
0:03:05
Wetland CNC Router Part 10 - Spraying the Steel
0:11:34
Multicam CNC Router Pinion Shaft Repair Part One
0:08:11
Wetland CNC Router Part 7 - Spraying Color
0:04:45
Wetland CNC Router Part 19 - Mounting the Monitor
0:07:37
Wetland CNC Router Part 14 - Gear Track and Hold Down Fabrication
0:07:27
Wetland CNC Router Part 12 - Installing Z Axis + Gantry XBrace
0:06:53
Wetland CNC Router Part 23 - Thoughts on some revisions
Комментарии