Tighten your CPU cooler

preview_player
Показать описание
Show a friend that needs better temps #pcgaming #pcgamer #pcmasterrace #pcbuild #pcsetup #signalrgb
  1. SignalRGB
Рекомендации по теме
Tighten your CPU 0:00:11

Tighten your CPU cooler

Is mounting pressure 0:03:58

Is mounting pressure important for CPU thermals?

CPU Cooler tightening 0:00:14

CPU Cooler tightening

How to fix 0:00:11

How to fix noisy pc fan 2

Intel heatsink installation 0:00:53

Intel heatsink installation

The Sound No 0:00:35

The Sound No PC Gamer Wants to Hear 😔

Is Your CPU 0:16:35

Is Your CPU Cooler Not Fitting? Rotating a CPU Cooler | Installing a CPU Cooler

You need to 0:00:38

You need to install your PC fans like this!

Speed Up Your 0:04:14

Speed Up Your Lenovo Legion R7000 2020 Prevent Overheating With Dust Cleaning & New Thermal Pas...

is burnt thermal 0:00:23

is burnt thermal paste any good at cooling a cpu? #shorts

Cpu cooler won’t 0:00:08

Cpu cooler won’t tighten up!

DIY CPU Cooler 0:05:30

DIY CPU Cooler Mod: Should you stack your CPU coolers?

Loose CPU cooler 0:00:55

Loose CPU cooler

How to Properly 0:03:19

How to Properly Mount a Stubborn Intel Stock Cooler 100% of the Time

Upgrading your CPU 0:08:46

Upgrading your CPU Cooler with KitGuru

how to screw 0:00:21

how to screw the cpu fan, The right screw driver

PC Water cooling 0:00:06

PC Water cooling failed 😭 #pc #watercooling #failed

How to Replace 0:04:28

How to Replace CPU Cooler with AIO - iBUYPOWER AMD Intel

How to Apply 0:05:15

How to Apply Thermal Paste to a CPU

How to Repair 0:14:57

How to Repair Intel CPU Cooler with broken Legs / Plastic pins ?

This PC was 0:16:09

This PC was super unstable, here's what was causing it...

THIS is Why 0:16:58

THIS is Why Lapping Your Cooler is SO Important!!

Super Simple Guide 0:09:42

Super Simple Guide to Install your CPU Cooler

CPU cooler tips! 0:00:35

CPU cooler tips! #tech #technology #coolermaster #gamingpc #cpu #cpucooler #pctips #pcbuildingtips

Комментарии
Автор

Get SignalRGB to start syncing your RGB devices without needing to have multiple RGB apps installed! SignalRGB supports over 100 brands and thousands of devices SKUs.

SignalRGB
Автор

My drill melted to the motherboard, where is part two?

skottyboy
Автор

Although this is true, you should not use power tools!

FBI_guy
Автор

It is highly discouraged to tighten the CPU cooler using a power drill!
Why?
* Component Damage: Tightening the cooler screws with a power drill risks damaging the CPU socket, heatsink, or other motherboard components. Excessive torque can cause the screw threads to break, the heatsink to bend, or even break.
* Electrical Risk: Using electrical equipment near computer components can potentially cause short circuits or damage to other electronic components.
* The Right Way: Use a hand screwdriver with the right size to tighten the cooler screws. Make sure the torque is not too strong, just tight enough for the heatsink to adhere properly to the CPU.
How to Tighten the Cooler Correctly:
* Turn off the computer and unplug the power cord.
* Remove the side panel of the computer case.
* Identify the CPU cooler screws.
* Use a Philips screwdriver with the right size.
* Tighten the screws gradually and evenly. Do not overtighten!
* Make sure the heatsink adheres evenly to the CPU.
* Reinstall the side panel of the case and reconnect the power cord.
Additional Tips:
* Use good quality thermal paste. Thermal paste acts as a heat conductor between the CPU and the heatsink. * Clean the heatsink and CPU from old thermal paste before applying new ones.
* Make sure the cooling fan is working properly.
* Check the airflow inside the computer case.
If you are unsure how to do this, it is best to consult a computer technician.
Remember: Installing the cooler incorrectly can cause permanent damage to your computer.
Want to learn more about how to maintain your computer or troubleshoot cooling issues?

nfshpmwgaming
Автор

kindly add support for THUNDER TGK-360 HOLO WARRIORS Mechanical Keyboard and THUNDER TGM-99C BLADE Mouse i am waiting for ur response.Thanks in advanced

ArslanAnwar-so