What Does SWITCHBACK mean | Nissan GTR | FlyRyde

What does switchback mean? Nissan GTR Switchback LED Bolt wiring install demonstration at FlyRyde.

This setup was completed using a Morimoto Xchange Driver, which can be found here:

▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀

Check out the Tools and Gear I use:
(By visiting these links we will receive a small commission, at no additional cost to you. )

ⓢⓤⓑⓢⓒⓡⓘⓑⓔ

Call us: [phone]

▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀

FOLLOW US ON SOCIAL MEDIA

[jasonrhodes]

This helped out a ton. I’ve been building headlights for my Tacoma and I’m using switchback with the DRLs. And I’m not mistaking this works around from disabling them.

[robjodicarter]

Please don't let this come off as being aggressive at all, how come you only do most of your videos on high end cars. Most of us do ALOT on a budget and drive civics, accords focus blah blah blah. I personally drive a Suzuki samurai, and 98 Accord. It would be great if you could do some budget diy on the lower end of the spectrum. Now all of your videos are great!! Great content!!! Awesome products and sweet builds. Just throwing that idea out there. Thanks for all the great videos

[dominickirkwood]

Very good my bro keep up and love video 💯

[jellyg.]

You make great videos and this was very informative. I understood how to wire them but I have a question regarding my car. It's a Yaris that has a small 168 bulb that acts as parking light inside the housing, it illuminates the reflector when the parking lights are turned on. I would like to convert that bulb to switchback so it works as signal too. What bulb should I use and will I need a separate controller like the one on this video or those bulbs include it? Thanks a bunch for all the info.

[corymcdonald]

I love the super in depth tutorial videos!

[BlazingMusic]

Is it also possible to use this module to have an amber drl switchback? So instead of the white use the same amber as the turnsignal. Or fo you still need an separate amber led strip for the drl?

[SuperRios]

Nice video, question for universal fitment do I need to driver? L and R? Please let me know.

[andresbecerra]

Would you be able to use this to make an RGB strip switchback?

[MRGreen]

8:54 I tapped into my 2016 F150 running light/ turn signal/ and ground using Profile Pivot switchback, but I get hyper flash. I installed a resistor on the running light and now as long as I am running my running lights on I have zero issues. But if I keep my park lights or running lights off, I still get hyper flashing then the PCM turns off all signals. Very frustrating! Before I pull the headlights back
out to take a look. Do you have any suggestions? Thanks!!

[magyar]

Ahh what timing, was looking at getting those switch back leds for a Subaru Legacy Gen 4 post facelift and was wondering on how to do it.

[ايمنشرفالدين-جص]

Hello bro
Please can you send the link how can I buy the switch back control
Thank you 😘

[spciak]

Only at the intro and already hit like 👍 keep up the good work! Another helpful tutorial as always!

[matttakahashi]

If I want amber DRLs do I just tap the amber wire from the replacement LED board to the cars DRL wire?

[Bwilson-]

Why don't you use exterior tesa tape?

[derrickperry]

That exchanger isn't needed when you have the ghozt led module correct? And what wire on the car harness would you tap into when utilizing the ghozt module?

[DiscardedZombie]

can I use these to only shut off my halos/drls? I only want my DRL LEDs to shut off when I use my stock turn signals. I don't have amber halos to switch to.

[meademorgan]

Can I buy a pair of those exchange drivers from you? Do you sell them on your web site? Thanks for any info., you do awesome work.

[Lilyote.]

Was watching this video and wondering if I could use a switch back I have a 2021 F250 and the side mirror lights are amber and I want to turn them white and have a switchback feature can you help me with this if you can please let me know I really would appreciate it thanks

[jcfannin]

Can you make a video on how to add side markers to a car that doesnt already have side markers? IE my 09 civic. I'm installing jdm fenders that have sidemarker holes and instead of patching the holese I'm tryrin gto install side marker lights like the oem jdm civic had. Any help would be cool.

[dzionassi]

Ned your help, Can you check if XChange Driver will work from 6v?