Dishwasher Repair - Replacing the Hose Coupler (GE Part # WD24X10066)

If your range/stove/oven is having any of these symptoms, then replacing the hose coupler could solve your appliance problem.
1) Leaking water.

PartSelect Part Number: PS8746200
GE Part Number: WD24X10066

Tools used for this repair/replacement:
1) ¼ inch nut driver
2) Slip joint pliers
3) Utility knift
4) Philips Screw Driver

[nancyivie]

Thank you so much. We were lost until we found this video and were able to take it apart and put it back together. We priced a new dishwasher and it was 900.00. We spent 59.00 for our part.

[Michelegermain]

This was a very well done tutorial. My husband and I followed it step by step and had it done in less than an hour. Thank you very much!!!

[chuckborden]

GREAT VIDEO!!! Also ...when you discard your old portable dishwasher, remove the hose coupler off of it. Save yourself 90.00. Another quick way to fix this issue much quicker...cut the hose coupler off and splice the old one in..A mouse bit through one of our hoses..I just spliced it in...Worked for years. I spliced it about 3 ft below coupler so it can't be seen.

[COddietsch]

This was perfect. Life saver and it's 2021 now so you will never probably get this but thanks so much anyways. Our hose started popping off the faucet, Sears wants $89 just to come out and tell us it's the hose and if I refuse, and after they quote me $200 for a hose I refuse they still charge me $89 for the advise. A hose is $100. Thank you.

[jilldavenport]

Thanks for the very clear and helpful video. My son and I completed the job in one hour and my old dishwasher is back in business!

[jvrock]

I'm so glad I found this video! I was afraid we were going to have to give up having a dishwasher because the coupler stopped staying on the faucet. Now I know we can fix it! Thank you so much!

[nataliep]

Thanks so much. I got my parent's old GE Viscount dishwasher, which they got in the 80's sometime. I have been using it for about 8 years, but the collar on the coupler is cracked almost all the way through, so I ordered a replacement hose set. This video is exactly what I needed before starting to install the new part. Thanks again.

[Final.Fate]

This video was very helpful! My dishwasher had a few small differences, but it wasn't hard to figure out a way around them. Thank you for providing this.

[jtremblay]

Thank you. The Two back screws were the hardest not quite as easy as you make it look. Appreciate the video. Just fixed mine today.

[Desron]

This video made changing the hose coupler on my daughter-in-law's Maytag dishwasher a breeze! Thumbs up!

[alantuttphotography]

Many thanks for such a clear and easy to follow video.  Went very smoothly, and now our dishwasher doesn't leak at the faucet any more.

[johnfrank]

So this video was entirely wrong for my GE portable dishwasher. I had to remove the top which was correct. But I had to do that first. The on the back of the unit there were 2 screws on the bottom that had to be removed and the two screws on the top under the Formica top had to come out last. Then You need to remove the sound reduction insulation to get at the hoses, The hose connection is basically the same except I had to trim the replacement hose down to fit snugly. All and all it was not that hard of job, I wish I had the foresight to video it. The GE dishwasher model I have is a Nautlius. I hope this help with you repair.

[xxx-nghv]

no need to take the cabinet all apart, before you pull the old ones out, tie a string to them. Pull out old ones, tie string to new ones and pull out to where they attach. Presto, no cabinet removal.

[robertshuler]

On ours (GSC3500D35WW) there were two screws at the front under the top to remove first ... removed the top. Took out two screws at the top front holding the sides on and then the two at the bottom rear.
Sides came off easily lifting it off two tabs at the front.
We replaced the funnel fill and gasket and were surprised it was fixed so easily. No more leaks.

[JavaLuv]

Thank you for this video! Just replaced the hoses on my GE dishwasher, and this video was really helpful.

[MadameSomnambule]

I have a Kenmore dishwasher, but the setup is very similar. This should help tremendously

[MrLFDV]

thank you, worked great. Small problem on my side: was left with multiple screws. The "bucket" was different. I also had to break the part where the power cord is since it was welded inside. Worked! Sort of...

[bonnieforrester]

GREAT SAVE ME A BUNDLE OF MONEY THAT I DID NOT HAVE THANK YOU, REPAIR MAN, THUMBS UP FOR YOUR GUIDANCE, I RAN IT RIGHT AWAY AND IT`S ALL SYSTEMS GO NO MORE KITCHEN FLOODS.

[tty]

Would it be possible to replace the dishwasher all together? .... I wonder if the portable cabinet will fit a standard under cabinet model

[wendolynschlamp]

Can anyone tell me why this part was replaced? My dishwasher isn't drainning, so wondered if this part could be the problem ... Very helpful video to learn how to disassemble this model of dishwasher.