Xiaomi Vacum mop P Water extraction issue & Fix

preview_player
Показать описание
Xiaomi Mijia Robot Vacuum-Mop P styj02ym (stytj02ym)
Water extraction issue

On mine robot, Water is not going out of the robot but is dropping Inside.
This is due to an incorrect tank design on earlier version (new tanks are ok)

You can either buy a new design tank on ebay or Aliexpress or try to fix it like in this video.
Рекомендации по теме
Комментарии
Автор

Just remove the filter from the cartridge and you can use MOP ONLY function!

yapyyapo
Автор

For the new tank with halfway plastic, you can use a clear aquarium air pump tube to extend the length and also does a good seal to the mop hole. Yes, both tanks design have problem. Aquarium tube can also be cut into a thin ring as a O ring too.

darreny
Автор

Parabéns pelo ótimo trabalho! Vídeo bem esclarecedor!

Tenho a mop 3c, e estou com um problema.. não importa o quanto configuro a quantidade de agua, o pano da mopa fica enxarcado e ela começa a deslizar e o robo não era assim, no começo limpava perfeitamente sem ficar deslizando. Sabe me dizer o que poderia ser?

DouglasOtoni
Автор

Drinking straw fits perfectly, i used it. No glue needed.

maxisky
Автор

Xiaomi is a piece of shit. Mine is 6 months old and does not mop, the mop and the floor remains absolutely dry.

bobbyhilda
Автор

Mine doesn't drop water at all after 6 months of use

atsalos
Автор

Good evening, I realized that today the robot with the vacuum cleaner and floor cleaner mode has emitted very little water compared to the first time I used it. Also at the end of this cleanup he was unable to return to base (which he always did). I don't wish having sucked a sock this morning compromised anything

Ale-hhir
Автор

Is it normal for the tank to start dripping as soon as i fill it with water?

charpkun
Автор

Como faço pra desentupir o tanque? No caso o meu não desse agua

handersonbarros
Автор

For my Mi robot. when i install the water tank into the unit, there will be no water leak at all even i leave it there 5-10 hours. But as soon as I start the mopping, the water will come out continually until the water tank is empty ! even a very small room (only 9 sqm room). This causes the water to leak a lot on the floor and the mopping cloth will be very wet. Note sure whether this is the same problem with this video or not.

metheesaengow
Автор

Mine was not producing water and I could.not hear the pump turn on. There were no clogs. I tried with the filter removed no help. I realized that when I was putting the tank in I couldn't just let gravity do it. A little push down snapped it into place. I restarted and heard the pump immediately and all was good

csabo
Автор

is there any smell of mould if you check by smelling the filter, the basin, tank or mopping floor pad?

privacyconcerns
Автор

What is the size of 2 in 1 tank and what is the water capacity of it?

srikanthm
Автор

Please remove the picture at 1:07 as it is wrong. Both deposit are defective and need to be fixed.

foxaxel
Автор

The problem is my 2in 1 tank droplet water. Is it normal. I just put water in tank and it will eventually starts to drop water.

kemaleksi
Автор

In with model ? I read the model "STYTJ02YM" is solved, it is in model 1C, 2in1, STYJ02YM ? Many models :/

MarcOrrit
Автор

Battery problem in my robot .. every now and then it shows low battery ... How to fix it .. plz help

shrees
Автор

Do I need another tank because when I try to only mop I get an error that I must check the water tank. But vacuuming and mopping whit the combo tank has no issue and works great. I want to only mop but it doesn't seem to work !

PhilipPetkov
Автор

Any idea why xiaomi 1c is not getting mop wet from one day to another

esponjirris
Автор

Hi guys, even i had the correct tank type. still not working.

hoangbanxe