How To - DIY Toyota Corolla Remote Programming: Part II

We program the remote lock/unlock buttons in the second part of Dave's DIY key programming series for a 2013 Toyota Corolla.

[DIYDaveOK]

Here is a step-by-step list of instructions for this model year from CarAndTruckRemotes.com (not a sponsor):

[quangpod]

This worked on my 2016 corolla. My key and spare were not working. I assumed the battery died so I changed it. I assumed the spare died from not being used for years. I got one key to be reprogrammed. The other one I assume the battery is dead. Thank you Dave you saved me a ton of money at the dealership.

[iriseteru]

You're a lifesaver! My 2015 Toyota Corolla never cycled the door lock during the entire process, but I followed the instructions all the way through and it still worked!

[lucimarapacheco]

After I had changed the battery for my car key, it wasn’t working. I did this procedure and it is back to normal. Thank you for posting this! 🎉🤩

[lyleandre]

Awesome. Worked exactly as you said. I was able to put the fob parts into the old key!! Works like it came from the factory!!

[robertlaplante]

Your explanation to program the Toyota Corolla key fob worked as promised. Easy and quick. Thanks for sharing the the information.

[bumperxpert]

I bought 2 key fobs I paid $10 for both to be cut I did this process and both work total I paid was less than 35$ Thank you

[peterlin]

Thank you Dave.

This was a very clear video with instructions clearly laid out and very easy to follow.

[nickpopa]

Thank you so much I watched this video 20 times Doing every action as you did them on a 2017 Corolla getting frustrated because the locks wouldn’t cycle and it wasn’t working . Then I paused the video and tried to remember all the steps and I’m pretty sure I did them incorrectly but somehow the locks cycled I press the lock and unlock button and the key worked 😃.

[josiahenunwa]

It worked, I can’t believe it, I feel very happy like a child…Thank you DIYDAVID

[karpashimala]

Hi Dave, in your instructions; it is bestt if you only turn off and on ONCE. Twice will remove any other remotes that were installed, while one will allow you to keep existing remotes

[SuperLVang]

Thank you!
At the end, I had to step out of the vehicle and used the key fob, and it’s works ❤

[thebossnes]

Hey my key fob stopped being able to lock and unlock my corolla 2008 i have tried multiple of these videod and none of them work i am very confused

[andrew]

For some reason when I do these exact steps perfectly, I’m still unable to get the car to give the “success lock”. Not sure if that means there’s an underlying issue or what.

[misat]

Thanks Dave! Tried a few sequences that other Tubers posted with no luck. Your's did the trick!! (Note: my 2012 Camry did NOT audibly cycle mid-program and I had to run through the steps twice but it did successfully program the remote. Go figure🤷‍♀️)

[uTestTarget]

Thanks! Worked perfectly for my Corolla 2013.

[TheStefanieperu]

Awesome video. Will try this tomorrow morning can't wait. Just had a question I broke my original key. The black alarm part fell off but the key part I still have will this be enough for me to cut the new key fob blank I purchased and then follow these instructions?

[HBo]

I couldnt get my 2009 Corolla to get into programming mode, I followed all steps as followed and still had no results

The security light just keeps flashing. Door locks never cycled. Any help is appreciated!

[thumpydumpling]

Very clear, great instructions! It took me a longer time watching the video than it did reprograming the clicker.

[buddielasater]

I am going to replace the door control receiver on my friends 2011 Camry and hope this works to reprogram her FOB's. However I don't see your steps that you said would be listed below the video. Thanks in advance.