How To Connect Pvc Pipes Of The Same Size? The Plumber Won't Tell You

Pvc pipes of the same size have many ways to connect them together. In this video, I'll show you a very nice splicing that the craftsman won't show you.

#tips
#tricks
#pvcpipes
#AlexTips

[arunk]

Think good for bigger than 2 inch pipes and you are in an emergency, and cannot wait for coupling.

[udayquneis]

No, the interior edge may cause waste accumulation by considering long of time, it may obstruct the flow.

[niranjanpednekar]

This method reduces internal diameter, instead of putting small size pipe peace inside use bigger size pipe from outside to keep internal diameter same all the time, which is responsible for good water flow.

[AlexanderVinogradov]

Dont do this! That pipe will clog in 2 years because there is a lip inside

[disquiet]

There's a difference between arts and crafts and plumbing.

[johnluiten]

You’ve put an obstruction into the pipe. A small restriction to the flow and a place where debris may hang up. If there is not alternative, fine—but an outside fitting seems more desirable.

[marcellharmati]

As a plumber, I'm glad for this video, because it means that I'll have jobs for the rest of my life.

[SILVESTROThingS]

A much more durable connection can be obtained in the first method, which the author considered bad, it was enough to properly tear the pipe so that the length of the socket was the same as the diameter of the pipe, add glue or put a flat rubber gasket on the pipe with a smaller diameter.
In addition, these pipes look to me like pipes not for liquids, but for electrical installations, so if they were to be laid in the ground, the connection point should be wrapped with a special rubber tape.

[selphoneidf]

This method is useful only when all the stores are closed due to pandemic. Otherwise go for a traditional straight connection using a straight joint.

[abdulrahman-emzv]

Flow of water get reduced. External beauty is not concidered

[rchrdgrn]

No don't do it this way! There's so many points that that can leak heating the pipe and sleeving it would be better. The best way would be to make or buy an external. You could use an internal sleeve but use a solid pipe.

[YoutubePremium-umcu]

I'm a plumber we won't tell you to do it this way because we don't want you to flood your home even though it means more money for us

[delboytrotter]

The plumber won't tell it's wrong !!!!

[jayakumarmg]

This looks good. But, considering the flow of liquid first one is better. The second one causes a slight obstruction to the flow..

[nathanharris]

DO NOT DO THIS, they make pvc couplers for a reason… this isn’t an emergency fix, it’s how you cause an emergency problem! The edge of the inlet pipe would create a snagging ground for things like hair and waste material, I can’t stress this enough plz don’t ever do this, get a coupler and do the job right the first time! It’ll save you hundreds down the road

[JohnDoe-fbue]

Plumbers won't tell you this trick because it's a horrible trick. It create a lot of turbulence, disrupting the bondage as the water flows over the inner fitting.

[KerfMan]

I may use this technique to make a CB antenna mast out of 2 ..10 ft sections of 2 1/2 inch PVC schedule 40. I'll make the internal sleeve longer so that the second PVC pipe will have more of the sleeve inside it. Giving the top pipe more strength in the wind.

[anggapradita]

it will be very useful when work in night and the store is closed and need to finish the job immediately.. thanks for sharing

[ronaldmaxwell]

Yes, a real plumber won’t tell/show you todo this, because real plumber wouldn’t do such a dodgy brothers joint.

[BHK_DIYAtHome]

Not suitable for high pressure water sources, there is a risk of water leaking right at the cut, but it is also a good idea for constructing drainage pipes.