How to Fix GE Dishwasher Not Working At All | Only Blinking Start Light | Model GDT655SGJ0BB

In this Video, We have a GE Dishwasher, Model GDT655SGJ0BB, In which it was doing absolutely Nothing. It was only Flashing the Start Button but It would not Start at all. After Checking, We Found that The Board Was Defective. However, Another Common Part that Goes Bad in this Model is the Door Latch. As Such, We Changed out Both Parts. Are you Experiencing this same Issue? Make Sure to Watch the Whole Video to see How to Replace Both the Main Control Board and the Door Latch. - Thanks For Watching! Make Sure to Like and Subscribe For More DIY Repair Videos.

Please Like this Video, Share and Subscribe for Future DIY Videos. Support Our Channel by Using the Affiliate Links Below. If You Can, You may Also Leave a Tip Below. Thanks For Watching and for the Support.

#GEDishwasher #DishwasherNotWorking #DIYRepairsNow

Main Control Board:

Door Latch:

If this Video Helped you in any way, Consider Leaving a Tip:
- PayPal: @diyrepairsnow
- Venmo: @diyrepairsnow

*Please note that Links are Affiliate Links, Which Means by Using them We do Get a Small Commission. This Means You Can Support the Channel at No Extra Expense to you. Thank you for your Support.

Warning: Please Be sure to Unplug Any Appliance Before Starting any Repairs! This video is to help DIY's do the repairs themselves, at their own risk.

My Filming Equipment:

Thanks for Watching and be Sure to Subscribe for more HowTO/Repair Videos!

- DIY Repairs Now

#appliancerepair #appliance #appliances #kitchenappliances #homeappliances #repair #dishwasher #kitchen #refrigerator #home #fridge #refrigeratorrepair #oven #washerrepair #homeappliance #authorized #washingmachine #dryer #ovenrepair #service #stove #freezerrepair #dishwasherrepair #maintenance #washer #kitchendesign #dryerrepair #stoverepair #applianceparts #bhfyp

[kristinawildes]

2 years later and still saving lives good sir. Watched just your video went to the store and bought the parts. An hour later I have a running dishwasher!! Thank you!

[randyperez]

I just repaired my dishwasher with your video. I replaced the control panel first since it was already removed. The problem was still occurring. Then, I replaced the door latch, and it started working again. Thanks for sharing your expertise with us!

[BobSchmitt-oc]

My GE Profile Dishwasher had exactly the same problem as the one in your video so your advice helped me tremendously. I checked the door latch for continuity and it appeared to be working fine but I was still getting the yellow blinking light indicating an open door. I already had a replacement main control board on hand from a repair I did a couple of years ago when I ordered the wrong part by mistake. So I quickly replaced the board just like you did and my dishwasher started working again just fine. Thanks so much! You obviously know your appliances!

[salinapoland]

Thank you so much for this video! I'm so grateful for the step by step instructions. I spent 2 weeks without a dishwasher, and now it's working again. Woo hoo!

[flexjay]

I worked for a GE dealer for 40 years. For a Professional Tech, you can get " Smart HQ " hardware/ software scanner, and it will give you diagnostics, where you can often update the software, and find fault codes, unless there is a component that actually broke . The door latch is easy to test and was a waste of money for the customer.

[dirtydeeks]

thank you so much. my GE dishwasher stopped working, even after I turned it on/off again from my electrical panel so many times. Saved me $$$ from having to call a repair man over.

[countryside]

I just unplug the power connector. It is a lot easier. Also leave it unplugged for a while then plug it back in and see what happens. Also check to see if the green light in the main board is flashing. If it is your in business, if it just stays on it means you need a new control board. Excellent video on replacing these parts.

[Hans-Henrik]

Very good explained! I was able to fix the dishwasher within 40 min. Thank You🙏

[gadgetfreak]

Excellent video! Did the repair myself today and back in business. This was a great, straightforward, no-nonsense how-to video. Thanks for the help!

[brainsaladsurgery]

Aloha, I'm very grateful for your video, thanks for helping Mankind, every good action will have a positive result in this life and next ones. a big Mahalo. Greetings from the Hawai'i Nation, Aloha

[locstyletv]

Thank you!! My dishwasher had this exact problem and I was able to fix it myself because of your video

[evanvoelker]

Trouble shooting for this problem:
1. Unplug/pull circuit breaker for dishwasher. Wait 2 minutes, try to start.
2. Replace switch
3. Replace main circuit board

Thanks to uploader of this video for the great demo of replacing the board. Just don't be like me, and hand wash dishes for a week before trying to unplug and plug the thing back in. Free to try, and will save you a lot of trouble!

[bernarddouthit]

Great job with this video. There's another 1-2 I've seen about this repair, but yours includes much more detail. I have the stainless steel version of this exact dishwasher and I get no lights at all on the display. I'm 99% sure the Control Board needs to be replaced. This does take some skill, but I'd guess that having it done professionally would cost $200-$300 - or more.

[SemihOren-go]

Great video thank you sooo much my problem was doorlatch great solved for 28 dollars 👍👍👍👍👍👍

[jefflancaster]

I'm fixing mine later today by having a Bosh dishwasher installed that should take care of it

[katybecker]

Thank you very much. Not super handy but you made this an easy project.

[lincolnsday]

Worked for me! Just let it run through the pump out cycle

[lithcause]

where can i order these same parts mine broke today

[tjones]

Thank you so much! Saved me a service call!

[tablet]

I only have trouble w the blinking light after a power interrupt. Unplugging to reset doesn't work all the time. If it was a board it would never work