Smallest Head Size! Milwaukee Tool M12 FUEL 3/8' and 1/4' Extended Reach High-Speed Ratchet 2569-21

Torque: 35ft-lbs
RPM: 450RPM
Length w/ Battery: 15.2”
Weight w/ Battery: 2.4lbs
Warranty: 5 yrs
Kit Includes: M12 FUEL 3/8” Extended Reach High-Speed Ratchet (2569-20), M12 CP 2.0AH Battery (48-11-2420), M12 Lithium-ion Battery Charger (48-59-2401) and Contractor Bag

Torque: 35ft-lbs
RPM: 450RPM
Tool Length: 14.4”
Tool Weight (w/o battery): 2.34lbs
Warranty: 5 yrs
Includes: (1) M12 FUEL 1/4” Extended Reach High-Speed Ratchet

Milwaukee Tool M12 FUEL Extended Reach High-Speed Ratchet Protective Boot

[konadayz]

I don't know why so many grumble about battery ratchets not having enough torque. If that's you use an impact. Battery ratchets are for running bolts or nuts on or off. Not for breaking loose fastners.

[Jay_Ira]

I've never met anyone who pulls the trigger to loosen a fastener. We treat them like a ratchet then pull the trigger to run the hardware out. This is how I use every electric ratchet regardless of brand or speed. It has worked well for me at work with my Milwaukee ratchets and at home with the Husky one.

[sithhul]

Finally reviews for the new high speed extended ratchet. I guess I was lucky to get mine months ago. Exchanged the anvil from 3/8 to 1/4…helps get to tight space without loosing the length

[Munchiie]

Killing it with these videos lately !! Love the details as always and straight to the point !

[superspeeder]

The original length and extended length 3/8” head size is the same as the 1/2” model, which is HUGE for a 3/8” ratchet and why I didn’t get them. I prefer the non-fuel M12 3/8 version.

I might have gone for this high speed extended model if it weren’t for the eye-watering price. Ouch!!!

[ironman.]

PLEASE show us how to install the rubber boot over the 3/8 drive extended faster ratchet. PLEASE!!! I have them and impossible to stretch it onto the ratchet.!!

[cortezaz]

I didn’t like the 1/4” being shorter so I bought 1/4” anvil and did a temporary swap on my 3/8” and it fits perfectly. So I ordered another 3/8” and did the swap I got a 1/4” and a 3/8” ratchets, same length. 👍

[bernardmatias]

I have 2 milwauke 3/8 ratchets, the high speed and the big head fuel. I want the long necks but I feel like I'll just end up sending them in like these 2 I have. I really don't want to drop money and get a snap on since my cordless system is milwaukee. I feel like the ratchets are their weak point. I beat the hell out of my impacts and they are great.

[nitrousme]

Thanks for making this video, my 1/4 is in the mail

[INTERLAGOS]

I wish you would have done side by side 3/8 and 1/4 to see the size differences. The head size and length comparison is what I was looking for.

[donalexey]

Why are those 250 each? I remember buying non fuel for a little more than a 100.

[wim]

Finally Milwaukee got the head & size right, only took 3 revisions...

[cucolopez]

If you buy through home depot at this time 2/23/23 buy more save more I bought both 1/4 and 3/8 for $400

[HHotWeather]

What do you think the tooth count is? I cant find that info.

[fredio]

Not really designed for breaking bolts loose with the motor. Pull on the handle to break it, then squeeze to unwind. It's a ratchet, can't do that with an impact gun.

[MrSupernova]

Can these ratchets be used to break nuts free by manually turning them? If so, then these are nice to have.

[lnybin]

I made the mistake of getting the higher torque, slower ratchet when I bought my M12 ratchet. I should have researched more.

[joychung]

we need ratchet with "good" power and speed where impact can't fit to work on. at least, able to remove 10mm locktite bolt. this is where this ratchet shine. timing cover from 4 cylinder/6 cylinder, water pump, any side engine job. this is where you hate to wrench the most.

[jeremynguyen]

Hello Workshop Addict how much does the tool cost

[XerxezsX]

The fast speed seems like counter intuitive, they should have left it at 250rpm.