Bracket Stairway Design Basics - Stair Building

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

I used wood instead of brackets and after 15yrs still standing strong.I think its not the wood but how you mount it.Use heavy duty screws and predrill and I used 4 screws on each piece.Very solid

rubo
Автор

So why wouldn’t you recommend wooden cleats?

financialsuccess
Автор

Great videos! Do you have any thoughts on how to build deck stairways using solid stringers and composite (1 x 6) decking for treads?

steves
Автор

One reason to use the wood block or metal bracket to support the tread is that 2 x 12s say in redwood are expensive. But you seem to use a 2 x 12 anyway. Does't make much sense from a cost point of view. Might as well just notch the stringer...

kalo
Автор

I would love to have the measurements and the math used to make the stringers themselves. looking to make a couple sets that are 3ft in total height.

Jewell
Автор

A good reason why it's good to have closed stairs is to prevent very serious to fatal injuries!

ccrescue
Автор

Hi. I like your video. What is the size of the plate form and what is the stair opening?

sapounngin
Автор

Did you use 2x12 or 2x10 for the actual step? I am having a hard time determining how far back or forward the step should be. Thank you in advance.

wesleybauer
Автор

so, is it required to not have an open riser? Or what is the minimin open gap on the riser?

carloslozano
Автор

Sorry this video is 6 years old so probably won't get an answer, but I read state l stair stringers need to be 18 inches apart, or maybe 26 if wood is thicker. But I've seen stairs like this all my life and it doesn't seem to be an issue.

Is it okay to not follow that rule? Or nobody really cares? Just building stairs and trying to figure stuff out.

Also the gap question. I've always seen stairs with more than a 4 inch gap. Maybe it's not an issue on short stairs? Actually I see floating stairs and lots of stuff. What's the story there?

Averagesasquatch
Автор

Hello. Could you tell me what type of wood you used and what the dimensions of the stringer and treads are? Thank you :-)

gassiusdave
Автор

wood seems stronger than that piss thin bracket lol

TheTechGuider