CR10s ProV2 firmware upgrade

The creality 1.7.0 firmware does not have an option to set probe offsets for the Micro swiss direct drive setup. The only solution was to upgrade the firmware. Although there is one from Tiny machines, I used firmware compiled by Nic Wilson from his fb page.

[webslinger]

Just in case you're not able to find it. I've uploaded a copy on Github

[feaseytony]

Just got an "Unrepaired" cr10s pro v2 and have been very frustrated with the lack of available tuning from the bog stander ui - having to make every adjustment via gcode commands using octoprint is a real pain!! this firmware upgrade has transformed that usability in the space of 30 mins great job by you and Nic Wilson - many thanks

[emilyanthony]

Dude... I've been fighting with firmware for a few weeks with my cr10s pro v2. I installed the MS DD and have had various problems building firmware. You've really helped me out here by putting this on github. I'm so grateful. Thank you.

[marksneyd]

Great video, thank you
What does the Validate Mesh button do in the 5 point grid auxiliary level screen?

[Defyant]

This is interesting, i have one of that just wont connect to the pc.... i have 2 other that seem to connect fine. I wonder if updating the screen firmware first might help with connecting.

[bassmaster]

Will this firmware make it so I can color swap from Cura slicer settings?

[Donjitsu]

Hello, recently my Cr10S Pro V2 got stuck on the load screen and while looking for a solution I found this video, I followed the instructions and did the tiny machines upgrade. It did flash the screen and it fully loaded. However, now my touch screen is unresponsive. Oddly it would work some time perfectly, then I would have to hold my finger for a few moments then it it would respond and then more time than not it would not respond at all. I then found the factory flash setting on the Creality website and restored it to the original. It did come on but responded the same so I then went back to the tiny machines files but still not responsive. Could this actually be a touch screen problem or do I not have the right flash files? Or do you think this option would work. Any help would be greatly appreciated!

[berniceolivier]

After flashing with this firmware my auto level option won't turn on. It only stays on off. Please help!

[nicojaime]

its works for creality cr10spro ? do you have any information about that ? I need it a firmware and lcd driver, because its not working, thanks !

[sneeuwpop]

When using XLoader I get upload failed. The problem might be that XLoader doesnt detect the Mega(ATMEGA2560) devide at all, it just says ArdiunoMega, the dropdown menu only shows 2 options: CC01 & CR03. Any idea how to fix this problem?

[splacl]

my machine keeps doing that startup sound every now and then after the firmware update... really annoying. thinking of removing the speaker because of it.

[SkullofSpades]

Can someone send me the link for Nic Wilson's firmware?

[prod_jay]

Hi there,
I commented on your temperature controller video. Im looking for a tutorial on how to make a single channel relay And is there any way we can use the lcd display without that thingy that converts all the pins into 4 pins? And can you please reverse the code so the the relay turns on when the temperature is lower than set??? And i really appreciate your work bro. Keep it up.

[Electronidus]

i did this and now some of the touch buttons dont do anything

[adamw.]

Why are u using clips?on mat isn't magnetic

[jg]

The hex kept failing no matter what I did

[samspeaks]

whisper mumbling over the sound of a lightsaber.. why even upload this.