How to Update Firmware on the CR-10 V2 With Tiny Machines in 2020!

How to install Tiny Machine Firmware on the CR10V2 (2020)

Xloader:

Driver:

Firmware:

[DaveMack-cz]

cant download the driver file it says its not there

[ryansbasscovers]

I have had HELL on earth with the cr-10v2. It has been painfully difficult to get my firmware to work. This however is the absolute PERFECT guide. You don’t skip a thing and thankfully there’s no code my little brain has to deal with

[alpapis]

Oh my gosh this was a LIFE SAVER! Literally nothing else showed me how to do this!

[danielalbiachstrauber]

Thanks dude, i revived my bricked CR10 V3 with this method.

[Alexander-imjr]

WOWWWW. Just like that. WOWWWW. I have pretty much given up. But it was that easy. THANK YOU SO SO MUCH

[howgii]

Thank you so much, I have been pulling my hair out after my first FW flash failed and I had to re upload the bootloader. I spent all of my saturday doing this and your solution finally worked. Now I'll try to get the BLtouch working...

[CorbinAntu]

The link for the driver is not working? Is it just me or is the link bad now?

[aha]

Can you flash back the original firmware from creality?

[hungryhungryhummer]

Nice video. Very simple. This will allow me to increase my hotend temp past 260c right? I just did an e3dv6 upgrade.

[jamesburlison-gued]

Thank you so much i was so lost, you're a champion

[TheOldLynx]

Link for the DRIVER is dead...!!! Can't makeit ON again???

[mcunoturbo]

what file would i need for the cr10 v2 with bltouch and the e3d titan direct extruder??

[IMChrisThom]

How can I tell which version of the firmware is right for me? I also have a BLT with my v2 but also a direct drive. Where can I find what all those codes mean? Also, when I tried to use a version similar to the one you did I got an Upload failed error but it doesn't tell me why

[chrisharman]

Can I check. With tiny machines firmware. If run out of filament past the sensor will the bed cool down. Or does the bed stay at temperature?

[gabrielluccabraga]

thanks, thanks and thanks!
your guide helped me a lot!

[spafa]

Did you install a bootloader? I am new to this and have never upgraded my firmware. Some of the other videos i have watched said u have to have one. I bought my machine from tiny machines

[sed]

Anyone know why it would keep showing my nozzle temp stuck a 260 but have now heat

[alexwinters]

My cr10 v3 is stuck on uploading for the past 2 hours now ☹️

[Dannefan]

Hi!
I'm wondering the following: Do you have your power cabel connected to your printer or not?
Also, is the printer on while you use the X-loader to flash the mainboard?
cheers!

[SarabaL]

When I click on the Firmware link, It wont give me the option to download? it just opens up a HEX file in a separate browser
tab.. What am I missing?
thanks