CR10S PRO BLTOUCH FIRMWARE UPDATE - Response to update comment - How to find the firmware

CR10S PRO BLTOUCH FIRMWARE UPDATE - Response to update comment. How to find the firmware
Some people were confused to the missing firmware files from my previous video and I wanted to alleviate the issue by providing you information on how to find the firmware files.

Firmware:

#cr10spro #bltouch #cr10sprofirmware

[bretspangler]

The file names have changed again, any chance of an update?

[Me-chjo]

Hi, I have updated the firmware for my CR-10S Pro V2 with Tiny Machines 10SProV2_BIL_DW7.4. Now when I select to move the nozzle to the centre it is not in the centre anymore (X - 177, Y -150). Anything can be done to set X? Many thanks

[theone-]

hi.i have a cr10s pro.i can not resume print after hang up or turn off.please help me.

[richardbruckner]

James
The latest firmware is for the V2.
Can that be used now on the CR10S Pro with the BLTouch addition?

[MrTienob]

Thank you for your video which is usefull to learn how to find by oneself the files we need, which I tried... Unfortunately I didn't find any file for the update of the screen for my CR10S PRO BLTOUCH, eather on Github nor on Tiny machines links. The file : you indicated on Github at 2:56 is actually for CR10S PRO_V2. And on Tiny Machine there are hex files but no Screen/DWIN_SET except for v2. I spend hours to search and try to understand all this, this drives me crazy...

[trailcameravideos]

James. Make sure you tell people to format their card to 4096 (allocation size) because not all cards have that option or come up (for the DWIN_SET). if you don't it will all come up as 0s when you try to flash it.

[scottwinchester]

Hi James, I'm currently trying to install a CR-TOUCH on the CR10-S PRO and need to alter the source code a bit for it to work. I can only find .hex files for the BL-TOUCH and I don't think they're editable. Do you know if there is a source code file for the "10SPro_BLT_UBL_DW7.4.6.hex" file so I can make the necessary changes to it? Thank you in advance.

[FamousLegend]

I cant find the hex file for version 1 anymore
it's not in the link

[praveenjtvm]

Hi brother.. i'm in a trouble....I need a help from have a machine with me CR 10S Pro V2, and that machine main board is faulty, i have a new main board with me that is CR 10S Pro.
My question is i can use that board for CR 10S Pro V2 ...?
If i can use, how i need to configure the board and how to configure the BL Touch and everything...

[megatech]

I’m confused. I have a CR10S Pro V2 with a BLTouch. Non tiny Machines version. I want to have marlin 2.0. Which file do I use?

[johnboy]

Hi James can you just point me to one file to go into the main pcb and the other file to go into the display pcb . I have a CR10S PRO with a BLTouch 3.1 sensor to fit.

[OscarLopez-ew]

hi, please, i need help with editing firmware 1.70.1 for my cr10 s pro (v1). I need to calibrate the hot bed PID, but the firmware does not allow it. O dont know how to edit it. Does anyone have this firmware that they can give me? . The tiny machine version did no work for me (allows you to calibrate the hotend and bed pid, but requires configuring many more printer parameters). Thank

[SwingsNRoundabouts]

Hi, Been following your videos and have installed the bl touch. I am currently trying to upload the hex file but it shows uploading then shows zero bite uploaded. My laptop finds the COMM ok but nothing shows as uploaded. Im a little stuck now as the bltouch wont work. Any ideas?

[Ethan-rrjn]

Please help. When I try the stock probe (Which i have) and try to upload it using Cura I am unable to (Because it is a .hex.gz file).

[trogers]

I have a question, if the firmware lets you level the bed before you ever start a print, do you need to have the g29 in your start gcode, or is it redundant, is there a gcode line to just load it from the printer?

[richardbruckner]

I'm referring to the screen files.

[keldsor]

I'm sure you do a great job here BUT ...

you DON'T understand what a 3D print user need !

He/she needs a DIRECT link to the SCREEN files to use on his/her machine !
He/she needs a DIRECT link to the MAIN PCB HEX file to use on his/her machine !

All that explaining of CR-X DTU and so on is not at all of interest of the 90% og the users - it's just messing it all up !

I know because I just installed a BL Touch on my CR10sPRO version 2.4 mainboard - what is the DIRECT LINK to

1) the screen files
2) the HEX file to the main board

I'm NOR AT ALL sure I have the right files installed because I still see some left over from extruder 2 (and my printer only have 1 extruder !) and the bed leveling is kind of confusing and maybe not working at all ...