HONEYWELL HOME T3 THERMOSTAT WIRING CONNECTIONS AND SETUP

RTH6360D1002 Honeywell home T3 / home owners thermostat get it at most home improvement stores. How to wire it up and configure it to your specific needs weather he 1 heat only, 1 cool only or heat pump

MY Amazon Affiliate links
Get It here 👇

#d2dnyac #thermostat

[listenupp]

Excellent video - loved the details. Besides the board being famous you are famous for being an excellent instructor!!!

[juancarlospadilla]

I was a little bit frustrated because I installed a DIY heat pump system and when I put my thermostat in cool, air was coming out hot and vice versa. You saved me the day! Thank you!

[aprilrenaud]

Oh my goodness!!! This video was SO incredibly helpful! Thank you so much for talking the time to explain each setting & the associated wiring. Life saver!

[michelbartolini]

Thank you. My ancient floor heater wasn’t working with the schedule. So I watched your video and programmed it to no schedule and it turned on. I could not get anyone out here to work on my heater. It’s winter here and I have been using my oven to heat my house. Thank you so much again.

[MelbourneMobileDetailing]

This video was super helpful ... Ive got a 2 wire setup for a ducted heater here in Australia and I couldn't figure it out till I watched this video .. A simple R to W connection made everything just work .. .Thanx again :)

[Joestacemazjojo]

Perfect video. Took just minutes to do. I only had 2 wires and a jumper so the comments and replies were very helpful as well there.

[MrCaveman]

Most of my wiring is the same but my old Tstat had a Black wire going to W/E and when I talked to Honewell they said to "Tape it off". Now I have no heat at all. Compressor and fan run but no heat! It's in the 50's in my house and I can't figure this out. My old Blue wire was on the "C" terminal. I'm guessing I will have to pull the cover off of my Heat Pump unit and try to figure out which wires go to what. Or just hook my old Tstat back up so we have heat. I was just gonna change it out to this Programmable one so we could control when the heat and A/C was going to come on during "peak" hours....which our Power Company has CRAZY charges for. Lot of people upset about what they are doing.

[williamarias]

Excelente video, thanks, I set up my thermostat watching this tutorial

[garybranche]

I have a Trane air conditioning unit with a heat pump I need to know what colors the wires are to the ob switch reverse valve and the emergency heat

[Powerstroke]

I only have 2 wires. One is red, the other seems to be black with some white on it. I have the Red wire going to "R" as it was on the previous thermostat, but the black wire was connected to 'W', so that's where I have this setup currently. But, should the black wire be going to 'C' or 'W' or does it matter?

[rodee]

Have wood/oil combo furnace. Replacing wood thermostat with this. In the 205 program section which option should I choose?

[rickausterschmidt]

Hi, thanks for your video. I have 5 wires controlling a heat pump with aux/ emergency, and A/C
White, red, yellow, green, blue. There were 2 jumpers W2 to WE and RC to RH. I see you said the T3 thermostat takes care of the red/24 volt just needing one.
Does the same apply to the W2 to WE jumper? My Aux is blowing cold. The blue wire was on O/B so I put it in O/B

[Heinrich]

Just bought a Honeywell T3 thermostat. My old Honeywell is not reading correctly on the temperature, AC companies said I should replace it. I only have four wires, white for heating, yellow for air conditioning, green for fan, red for power 24 v. Seems pretty basic white to W yellow to Y green to G red to R. Hooked mine all up to the gray shaded plugins. Something's wrong my blower turns on and my heater but not my air conditioning cooler. All the wires were stuck in correctly nothing loose. Do you have any demonstrations on four wires, what could be the the problem, I ended up putting my older thermostat back on everything works.

[marbellahernandez]

Thank you soo much this helped me a lot saved me from calling a tech 😊

[DGABE]

@D2D NY Real World HVAC Simplified. I have a question i recently redid my thermostat with that exact model. But it keep on switching between hot and cold air. The old thermostat had jumper wires. In the manual it says to take the jumper wires but never says to put it in the new thermostat. Do i put the jumper wires into the new thermostat??

[davidbenisrael]

Nice informative and clear instructions. I purchased the RTH6360 thermostat. I have steam heat with two wires coming from wall, which terminals do I use? Thank you in advance.

[dawnonthefarm]

Thank you so much for the detailed info. It was very helpful!❤

[ceciliab]

I’m having an issue with where to add my wires. My current thermostat has R-red, Y-yellow, G-green, C-Black, O- orange and W-white.
I’m not sure where to put the wires for heat since the instructions say do not use w. Where do I connect my orange and white wires?

[Vinlyguyxx]

Thank you so much for all of the information and understanding.

I changed the stat in my apartment with a heat pump set up. I have double checked my wiring and made sure it is correct. The issue I am having is that I am not getting power to the stat unless I have batteries in it?

It’s like the power supply isn’t working . Yet the stat is functioning properly once batteries are in it. It’s got me scratching my head. I was wondering if you could help me out?

[jamesa]

Saved me also, i couldn't figure out why it was sending a signal to turn on the compressor outside. Had just the inside coming on.