How to Install a Honeywell T3 RTH6360D AC Heating Thermostat

#honeywell #thermostat #acrepair #larrysbrusch #T3PROGROMMABLE
In this video, we'll explain how to install a Honeywell T3 RTH6360D AC Heating Thermostat. This thermostat is a great way to keep your home warm in the winter and cool in the summer.

If you're looking to install a new heating thermostat in your home, then this video is for you! We'll walk you through the process of installing this thermostat, from start to finish. We'll also provide some helpful tips along the way, so that you can get this thermostat installed easily and efficiently!

*

[DB-mlbc]

As a woman who must do many of her own repairs, I thank you for your help! ❤

[tg]

That was so helpful, especially on the wiring part for someone who is not an electrician. I made several several trips to Lowe's and Home Depot and couldn't get any help until I ran into your video. Thank you very much.

[kgillen]

So well explained, step by step. Thanks!

[DChing]

Thank you for the explanation, well done….now, wish me luck!

[ADuncan]

Great video! Definately a used unit if the mounting bracket was already snapped in and the srcews were loose. Mine came with the mounting bracket in its own little plastic bag and the screws with plastic inserts in another plastic bag. :) This was very helpful!

[prodriveawayman]

Good lord.
I'm glad you made the video. I was about to pull my hair out. Very helpful 👌

[josemoniz]

Thanks for your video, I just bought exactly thermostat but the time to change my old one I get confused I have 4 wires blue, green black and red. No white wire. The red wire is connect to 2 in scruns. So I'm confused. Any idea to help me

[AmazingJayB]

Thanks for the vid, I just installed mine!

[brendon]

Hi, thank you for this video it really helped! Any idea why the time shown above “following schedule” would keep going up?

[THGILF]

Great video. Thank you.
I have just 2 wires old house replacing an old mercury thermostat.
Question is where would I place the two wires as color is not optional for me?
Thank you.

[backbank]

My big question is, how do I remove the face plate to change the batteries? I tried for 10 minutes but could not find the way to remove it. The user manual says to move it to the right then down but that did not work. Please help.

[Dooguy]

I didn't want a digital therm. But couldn't find a two stage heat therm. Didn't want batteries in either. But honeywell tech says i can bypass this ??? I only have 3 wires coming from my two stage propane tube radiant heater. Any help ? I know i need w1 and w2 to run it two stage. What about the 24v wire for power?

[normanguemo]

My current system is labeled as “RH” with a jumper to “RC”. Does my RH connects to “R” on HoneyWell thermostat? How about the jumper to RC?

[MrRichmiles]

Might wanna mention turning off the breaker(s) that controls the HVAC system.

[emj]

Thank you sir! You helped me immensely!

[melissaartmann]

Thanks! I was able to install mine with success.

[oliviafields]

I have 5 wires: red, yellow, white, green, and blue. Where does the blue go? I have it in O/B and nothing is working

[yulinjacky]

Do we need to put AA batteries into this?

[sittingwonderduck]

Followed all these instructions in this video and the manual. Still no heat turning on. Our old thermostat was working and the heat turns on but the heat wasn’t increasing to the set temperature.

[JulieAldige]

On or Off. Heat or Cool. I’m old & home most of the time. Don’t need, want or understand all this programming BS. Is there any way to use this manually, as & when I choose?