DIY Hanging Garage Shelves - Garage Storage Ideas

08:30 - 00:00How I built 16 feet of DIY Hanging Garage Shelves for less than $75 in my garage. Cheap and Easy storage you can build yourself with just a few simple tools and limited materials. Garage Storage Ideas

DON'T FORGET TO LIKE COMMENT AND SUBSCRIBE

Top videos you need to see:
The Ultimate Diy Hanging Garage Shelves Design You Need To Try! Garage Storage Ideas
How To Double Your Garage Storage Space - DIY Hanging Garage Shelves
Ceiling Mount Detail - DIY Hanging Garage Shelves

If you would like to help support my channel and use the WannaBFree Amazon affiliate link, I thank you in advance for your support. As an Amazon Associate I earn from qualifying purchases and no extra cost to you.

Stud Finder I've used for over 20 years and is used in this video - Stanley Hand Tools STHT77403 IntelliSensor Stud Sensor

WannaBFree Amazon affiliate link

Time Stamps:
00:00 - Intro
00:50 - Marking and Pre-drilling the 2x4's
01:31 - Cutting the 2x4's
01:50 - Fas n Tite Wood Screws
03:46 - Hanging the Frame on the wall
05:01 - Design details
05:53 - Mounting outer frame
06:25 - Ceiling mount details
07:54 - Measuring the plywood shelf
08:18 - Cutting the plywood shelf
08:30 - Installing the plywood shelf
09:22 - Finished shelf
09:52 - Dimensions

[milesconway]

I might do this and use it as a hide away when I need some space! Pillows, blankets and a curtain should do it.

[Moriarty]

I watched a ton of videos related to garage storage and decided yours won. My garage plan took different measurements but, I absolutely loved this simple plan. Finished it today and organized, thank you so much for sharing.

[lsequeira]

Thank you! Doing garage shelving this week and I learned a simple but great idea from you - to pre-install the cross pieces on to the back-end 2x4 before fastening the back end to the wall studs, eliminating the need for pocket holes.

[balljar]

On my last garage that had 10ish foot ceilings, I built shelves/racks for all my extra lumber and sheets of plywood. Saved a ton of space. The plywood was good for me because all i had was extra osb, but if you had different kinds of plywood, then getting to the lower sheets would be difficult. As for stick lumber, it was perfect because I kept them sorted by size.

[cwcole]

Thanks for sharing this video. I'm working on a similar project, and this showed up in my feed. I did basically the same thing, but mine is 8' tall, 16' wide, and 30"deep (4 shelves). It's designed to accommodate totes. I completely built out the frames on the floor and used load straps as a make-shift pully system to hoist the shelves into place. I'm using 19/32 OSB for shelf material. I used mostly scrap 2x4s for the 24" on center supports. Other than the supports, making cuts was minimal because I used 16' and 8' 2x4s. I'll rip the OSB and use the remaining for other 18" shelves. Yours looks very nice and sturdy. Because mine is so wide, I'm adding toggle bolts to the back side for added strength. I might do a couple of your hanging shelves as well.

[tatsuo]

I like the preparation of measuring and pre-drilling the holes on all the pieces - some relative to the ceiling joists/truces and some relative to the wall studs, some to the frame of the rack. Then pre-installing the right screws/lag bolts in the right places. Pre-assembling what makes sense in each case. Very simple and efficient. Nicely done!

[innovar]

Clean design. flawless built, simply explained. Thank you.

[juliopadilla]

Thanks so much for the video bro ! Today I did follow your instructions step by step and my project is done, I spent around $65 including the stud finder ($11) which was a great help.
👍🏻

[toddshumaker]

Appreciate the video!  Great job explaining along the way.  Definitely going to use this model!  Thanks again!!

[davidanderson]

I did the same thing last Spring, and it was a game changer for my garage storage

[saramerrill]

Just built a 4x8 shelf using your instructions. Super helpful- thank you for the video!

[johnnycruz]

This was a great video! I've shopped online for prefab shelves and questioned installation for a beginner. Your video creates confidence and cost effectiveness in a first attempt! Thank you

[Kessiwessi]

Thank you so much for the simple instructions.I'm gonna try this!

[RR-hrcp]

I liked your method better than other videos ive seen. Seems stronger and doesnt waste lumber. Thank you!

[Megalink]

You're the man. I didn't even realize that I have 2 ft of room above my garage door when it's open. Gonna do this all the way around.

[BoostedBoyd]

Very simple and straight forward! This is exactly how I will build mine today. Going to make one on both sides and directly above my garage door. Thanks for the video!

[justacrochetmum]

I really appreciated this video as I have to do it all on my own usually too!! Single mums need this video

[MrAvalos]

Very good idea . I will start this Monday a project like this on the laundry room and this idea help me too much to avoid job not necessary and also avoid like 4 or 5 2 x4 wood pieces.
Thanks for your idea.

[cipisoe]

معجب بشغلك
انت اول شخص يحدد سمك لوح الخشب المسطح
Like your work
You are the frist one to mention the plywood thickness
So thank you

[pamflowers]

What a neat idea! I built storage shelves all over my garage but never thought about the space beside the garage door. Thank you!