2003-2007 Honda Accord V6 Automatic Front Engine Mount replacement

Applies to 7th Gen Honda Accord 2003-2007 V6 Automatic transmission.

Symptoms included vibrations on startup, clunking sounds while driving on bumpy roads, clicking and squeaking when coming to a stop or accelerating from a stop. Initially thought is was issues with my front suspension; upper/lower control arms, sway bar bushings, ball joints, etc. but this was all tight. I will mention that I had already replaced all 4 strut assemblies which were worn out.

Conclusion: After changing the front engine mount, the ride was quieter but I could still hear some clunking and odd noises here and there when going over bumps. Turns out, I needed to replace the passenger side engine mount and driver side upper transmission mount. Now the ride is so much quieter and smoother. I took it on the most broken road in my area and it handles like new.

I have created separate videos for the additional mounts that I replaced. See links below.

[normal]

Thank you for your explanation and expertise and experience. My Daughter and I are going to do this repair tonight 🛠️👍🙏🤔

[justpostinup]

When I try to Jack the transmission up more the entire car lifts I need about a inch more clearance for new motor mount any idea why?

[jayzee]

Looks like the rear mount is causing a lot of movement, did you replace?

[justpostinup]

Would I be okay without jack stands? Also is the job doable without getting under the car

[rafatorresrt]

Mine has an electric connector, do you think I can use the aftermarket part?

[ahmadmalikzai]

It looks like you didn’t fix it it’s still shaking than before hahaha