2003 - 2007 Honda Accord V6 Engine and Trany Mounts Replacement

Review of an ebay aftermarket set of mount as well as installation tips.

[nuhdoi]

great video!
thanks for the rundown... the lower two tranny mounts you saved me tons of headache
cheers!

[elioneal]

The color dots mean that they were checked for mistakes different colors are for different shifts in the factory I used to make the Toyota ones

[ReynierMartinez]

Thank you!!! Your “in retrospect” statement is just what I needed since I was leaning towards the same conclusion based on the typical movement of the engine. ;)

[ManuelCamarena]

Thanks very much for the video! Very informative! I’m doing a clutch replacement on my accord and needed to replace mounts in the process! I appreciate your hard work!

[bobbyjohnson]

I really appreciate the video. It helped me a lot and saved me a ton of time.

FYI for others doing this job: I purchased these same mounts and had the same problem with the transmission mount not threading. I ended up keeping the original because there was no way to install the replacement. ALSO, after only 3 months and 2500 miles of normal road driving, the upper side mount failed. The seller sent me a replacement (I paid the shipping). I hope that it lasts longer than the first one I received. Overall, I'm not very pleased with the quality of these mounts (two out of six failed). I don't know if there are any other non-OEM mount kits that are worth considering, though.

[jonathanminter]

Thank you so much for this! Yours is the only video I found of the transmission mounts.

[ronniemartin]

Great video. To the point and very helpful. Appreciated.

[mendivil]

In the video the first mount you removed didn't look damage but the front lower engine mount and the pass side engine mount have definitely failed and in my experience as a Honda tech those are the two most common parts that require replacement.

[MrSKR]

Honda should have made some stronger transmission mounts for the v6. Way too much power for those anemic little mounts.

[carlosesquivel]

good job it looks like you got another job there bro the A arm bushing is cracked lol

[JzL]

Really useful video, time to change that trans mount :/

[ajaake]

Thank you for making this video. Can you post a link to parts.

[foosinaround]

Just from what I seen when its side by side...the angle is slightly different...just my observation...also I wrote this before reading as l always do to see if I'm in the ballpark from other comments...so if its already been stated...you know why🙂

[TSWislaK]

Do you have torque specs for everything?

[cyborggaming]

Do those mounts also fit the 2.4l engine ?

[epipolarus]

Hi Galco, how are those aftermarket mounts holding up? I'm thinking about replacing transmission mounts, the price difference between OEM and aftermarket is too much to ignore.

[kek]

How much would labor cost to replace all 3 transmission mounts at a shop?

[voteandvote]

Do you have to have a jack to change the upper transmission mount only?

[javiermontiel]

Would you use anti seize or thread locker to bolt them in?

[erikramos]

Question my upper transmission mount didn't have the stopper plate can it go without?