How to Disassemble and Clean Your PlayStation 4 Pro for Optimal Performance

preview_player
Показать описание
Hello, everyone! Are you prepared to explore the world of PlayStation 4 Pro repairs? In this video, we'll walk you through disassembling your PS4 Pro, cleaning it up, and repasting the CPU for improved cooling performance.

But, before we begin, make sure you have all of the essential equipment and materials on hand, and if you're not confident in your repair abilities, it's always better to leave it to the professionals.

We'll walk you through the entire process, from removing the screws and removing the back plate to cleaning the thermal paste and reapplying a new layer for better cooling. Don't worry, we'll point out any tough areas and provide helpful hints along the way.

So gather your supplies and let's get started! This video is likely to be a fascinating and instructive watch, whether you're a seasoned repair enthusiast or just curious about the inner workings of your PS4 Pro. And who knows your newfound repair talents might even wow your buddies!

So sit back, relax, and let's get to work on that PS4 Pro.

Hope you enjoy this wicked review. A like and a subscription would be appreciated!

You can also find me on Facebook or Twitter:


Рекомендации по теме
Комментарии
Автор

Followed this guide to figure out why my son's DVD player was not recognizing the discs. Turns out his little brother put a large coin into it...reassmbled and it works... 😂

SilentUSN
Автор

Just bought one second-hand from GameStop (I know, I knew I was testing my luck), got assaulted by dismembered roaches when I opened the box. This was really easy to follow to clean the console out, looks so much better now

short_personman
Автор

Removing the power supply/hard drive and a few screws/disconnect wires on the other side.
The "Entire" motherboard with both metal panels wiggle out at an angle without needing to take it all apart.
You won't have to repaste or anything. : )
Just found this out.

MatrixAlphaCWX
Автор

It's much better now.Thank you. It's really working.
No more airplane in the house.

petrisorserdaru
Автор

2:25: The shiny wobbly thing might be an electromagnetic interference (EMI) shield. Nice vid- thanks!! 😊

meindopen
Автор

Thank you for this! Bought a second hand ps4 pro from a friend of mine, was filthy inside made the 747 nosies and actually was very slow loading thongs like 'dropping into fortnite map' followed your vid and she is SO MUCH BETTER NOW!! just one thing the putting back together bit was a little confusing (got there in the end) thank you for this content, saved me a trip to the local gadget man! Keep up the good work!!❤❤❤

jaywblack
Автор

I would say the power supply cable is not difficult to remove their is a technique that requires very little force. The connector sits in a U shaped housing that is attached to the mother board of you look closely you can see a notch mid way up the connector you can wedge in the needle tips of the tweezers and use a fulcrum style rocking motion and it separates pretty easy.

This is the most damaged part in a previous repaired ps4pro and the cause of many dead systems as people rip the receptor right off the motherboard

Ghostviperz
Автор

Perfect through and consise. Everything I needed to know and see an a short video.

renoof
Автор

I appreciate your video, I was able to clean my Ps 4 pro. Grill was pretty much completely covered with dust. I have also replaced thermal paste. Now its all quite

arthunterns
Автор

Are Torx T8 and phillips head screwdrivers enough?

pulkit
Автор

Same console.same colore..i juste finish ed the thermal pate change op following u step by step...so thanks à lot

jameskidd
Автор

I did exactly that, now my fan is quiet but runs slowly, had to take off top cover to actually see if it's on, but doesn't speed up when console gets hotter, not a clue what to do.

Kratos-ybtt
Автор

Hey! This was a really good video and I was able to successfully disassemble and reassemble my PlayStation. However, though it still turns on, it’s still blinking blue. I’m not really sure what to do now, the hdmi chord I used works well with my Wii U, but the PlayStation just isn’t really doing anything.

bassy
Автор

Omg bro after I put that thing, my ps4pro jet is run very quiet!!!!

Momo-game
Автор

Looks more like a documentary than an actual assembly. Lots of video scenes are not clear like wi-fi Bluetooth wires, improper angle during disassembly

MirzaKhalid
Автор

Where does one buy this thermal paste and is it necessary to replace?

ramonibarra
Автор

What was the stuff that you put on the Playstation

desireegood
Автор

Is the 70% isopropyl alcohol ok to use?

APOLOGETICACE
Автор

Thank my ps4pro good and not overheating

Momo-game
Автор

what kind of screwdriver? 0:44 (couldnt hear)

lackramin