More Torque On My Kugoo M4 Pro Electric Scooter With A Better Ebike Controller

I'm back and I've been away modifying the Kugoo M4 Pro with a new controller.

It gives nearly double the torque, is more reliable, is regen capable and has cruise control on the button. It will peak at around 1300w on a full charge.

This a sensible and safe controller to install and shouldn't damage the battery. It will hold higher speeds easier and shave seconds of the 0-20mph time and pull harder uphill!

Controller:- 9 mosfet 25A KT controller

Display:- KT LCD7 or any other KT Display

Throttle

[RenaCCiYT]

my kugoo m4 came yesterday, took it for a test run and its sooo much fun :D

[alexanderstorm]

Thanks very much. Going to do this to my ienydd m4 pro

[one--eight]

Good stuff mate, I'm looking forward to the G Booster vid.
I can't seem to get regen braking working on mine, I also get that horrible noise sometimes when accelerating hard from standstill on full juice mode, it's done it from day one but it's going strong and seems fine if you just release throttle and build up gentler.
I've also bought an upgraded rear mudguard as the existing one is like a chocolate fireguard lol

[BINGO]

Nice 1 Billy, my M4 Pro is away on holiday to Poland for repairs & I probably won't see it again until after Christmas. Cheers for the links to the tools needed for the Headset Play Issue, Saved Me a few Quid.

[kwk]

Do you think it could be possible to ad another motor(same as the back one) to the front wheel? Double the motor - double the power :)

[elymental]

Just waiting on my new m4 arriving today ( fingers crossed 🤞 )
58 years old and still living it
New support here for you my friend
Also just watched your e bike video
I wish I had the skills to build but unfortunately disability restricted
I have always had the buz for anything with wheels
Ride safe 👍🛴🚴

[miguellima]

great work. It's very clear the increase in acceleration. Looking forward to your G Booster video.

[Antagon]

Do you have the old controller still laying around ? I would like to know what mosfets it uses, so that I could optionally replace them with better ones. I can source 100V 10m Ohm FETs pretty cheaply.

[nathantaylor]

Hiya bill l hope you had a nice Christmas 🎄 and new years, even tho the current lockdown situation is bad.

[justwandereuk]

Please do more videos really enjoyed them

[richgdj]

hi mate how did you get it to work right with your motor as iv just got mine which is the 1 you have added the link for with the kt lcd9 display and it it wont work right keeps cuttin out or throttle does nothing until i spin the wheel? any ideas or tips would be good my scooter is the bogist c1 pro 600w 48v 13ah. thanks rich

[erlandohenrique]

Boas como tu colocaste ela com essa potência quais foram os upgrades

[henryjensen]

Hey m8 i have some questions what controller is it in video and where you buy it and how to put 1200w controller on 500w engine whitout burning it? Thanks in front really hope you can help me I'm new to electric give me a old mc or car i can tune it in my sleep but this electronic thing's are really complicated for me hahq

[chronicalist]

Can I upgrade my 600w 48v honeywhale E5? It goes 53kmh or 30mph or 31mph i want 55 mph and 17.5ah battery is possible?

[CripNchill]

Nice video! Could you update the links? Are you using a stock motor?

[nataliapatrik]

I have m4 pro 13.5ah battery controller 500w motor 600w but the speed is bad onli 30km/h any help ?

[stueypinnock]

Do the controller plug into the kugoo wiring harness or you got to cut up wires..

[tomgamez]

Got an M4 yesterday for Christmas only got 20 but it kept creeping up to like 23 when I ran out of road now it's all aligned and the tires are pumped imma get a new speed run tomorrow if the weather allows

[Flackoknows]

Hey will this controller work on ienyrid Mr pro s+ ?

[UKMrMedical]

Can you send me link for the controller your using I have fitted an M365 with 48v mantis battery and g2 swing arm with rear motor