How to remove speed limiter Chinese Electric Bicycle - Ancheer

this one has Double battery Double motor

Other modes made by other brands and prices links below

[dublinvids]

I cut the wrong wire and the speed went crazy. Hiit 88 in no time and found myself back in good old 1955!

[Glo-Blades]

This worked for me. I purchased a replacement controller directly from Ancheer and it slowed my bike down. I think the original one must have already been unrestricted, but the replacement was not. I've read that for other controllers (not Ancheer) simply look for the one wire that originates from the controller, and returns to the controller (a loop), regardless of color. Thanks for the tip!

[chrisduke]

That bike sounds like it's blending Margarita's when it gets going.

[salvagemagician]

I believe those white wires are the ‘road legal’ switch . So for example I have a 1000W motor and with my wires connected (blue in my case, brand voilamart) then it restricts the bike to 250W (wattage limit to be road legal in the U.K) and then the bike is also limited to around 14Mph. Disconnect those blue (white in your case) just removes the 250W limiter and allows 1000W which does about 34mph . But then there is another means of speed limiter still active as at 34mph the motor will cut out and not accelerate higher than 34mph, if there was no further limiter the motor would keep going until it reached the max rpm capable on the supplied voltage. I’ve tested this and added extra volts and still the motor cuts at 34mph. So I believe it’s still using the motors hall sensors to monitor and limit the top mph the motor will achieve, also I believe it can use variables on the 3 phase power supplied to motor to monitor speed and still limit it . I’m going to try disconnecting the motors hall sensors to see if that makes any difference, if not then I’ll be opening up the control box (the small aluminium unit) and investigating in there to see if there’s any bypass or link or something I can find. But good video 👍🏼

[davidross]

I'm in the U.S. mine is 750 but unplugged 1000w I ride at 15 to 18mph I am in no hurry but my 48v bike can hit 33.2mph. in my case the wire was blue! but I knew of this before the video, good for others that did not have knowledge of this, great video.

[skyepilot]

Just did a 48v 20AH w/ 1000W rear hub wal- mart conversion on my 8 yr old Raleigh Atomic aluminum frame bike. The radar on my street clocked me at 26 mph one way and 24 mph the way back. Really happy with this setup. I guess there is no limiter on my controller.

[technocrat]

This does not fully remove the speed limiter. To get max ( 3rd ) speed you need to open up the speed controller. Then follow the 2 white wires to the circuit board. On the board there should be one wire going to a ground and one to K1 ( or speed 1 or low ) its printed on the board. ( k1 is low speed, k2 is high speed, there is no connection for speed 2/mid ) Now next to K1 you should see K2. You need to connect a wire from the empty K2 connection pad to the white ground wire. This will enable the 3rd & max speed. Almost all brushless speed controllers have 3 speeds but on some Chinese controllers they leave out the jumper wire to enable the highest speed. On speed controllers with the speed limiter white wires the options is speed 1 & speed 2 the controller does have the 3rd max speed but you have to solder the wire on to enable it.

[renevanvelsen]

Thnx dude, got my Ancheer today....gonna remove the limiter right now....😎

[marty]

Worked! for the Ecotric fat tire foldable bike 500w. Same white wire I have two of the same bikes and I raced them after to confirm. If your heavy 200+ won't go to much faster tho but still an improvement

[MoreFish]

Thank you! I hope I will have similar success on my new Sondors E Bilk when I get it next week.

[Frederico]

it worked on a random eletric bike/scooter. Thanks

[rayserx]

finally someone who shows how to remove the f%!cking limit, this video helps me a lot. tysm!

[RandyRandersonthefamous]

That's hilarious. They included it, but added a convenient, dedicated way to disable it. Thanks!

[MeAppleCat]

It worked. Before 18-19 kmh and after unplugging 24-25 kmh. Thanks Buddy 👍 Abo + Like

[Firemanfrog]

Thank you. This worked on my eskute voyager

[Funker_Z]

Wau thanks bro, i tested next days... I have this bike!, 👍😀

Yoooo this work but i have here other model of Ancheer ebike...
And this model of video i tested next days... Thank you👍✌️

[sugofa]

*I CUT ALL THE WHITE WIRE ON MY EBIKE. MY EBIKE IS NOW SUPER FAST*

[RTdeya]

I’m literally gonna buy the same e bike and this video came up

[kenswireart]

Ancheer has a 500watt ebike now u should make a review on that.

[law]

The white wires that is connected is actually the programming wire. It should be unplugged.