Does Lacquer Thinner cleans carbon on pistons/intake valve cleaning/decarbonize engine with water

preview_player
Показать описание
#alimech #carbon #intakevalve #Lacquer Thinner

In todays video we will answer (Does Lacquer Thinner cleans carbon on pistons), this video requested by so many of you guys if it cleans carbon on pistons or cleaning intake valve , or decarbonize engine
we put one can of lacquer thinner in gas tank and we drove the car till the tank is empty

on my previse video i did cleaning the carbon with steam
Even this is indirect injection engine, but still too much carbon buildup on the intake valve building up because, i drive the car aggressively sometime and the oil vapor passing from PCV valve to intake throttle

decarbonize engine with water is the cheapest method, but it only removes

light carbon, not a heavy carbon buildup, so steam does removes carbon buildup on piston and intake valve

this is a very common problem with indirect fuel injectors, because the fuel injectors located on top of the piston meaning the fuel injectors no longer washing the intake valves

in this video we will answer (Does water/steam cleanse pistons and intake valve of Direct/Indirect injection engine without REMOVING anything?) and i will show the process of intake valve cleaning without using special tool in another meaning: decarbonizing your engine with water

problems with direct injection engines
1. Rough ruining
2. Hard starting
3. Poor fuel economy
4. Loss of power
5. Misfiring

🔔 Hit the bell next to Subscribe so you don't miss a video!

Follow my Instagrams so we can be best friends
-------------------------------------------

Like my facebook page:
-------------------------------------------

**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos

Gears I Use:

For contact
Follow me
Instagram: ali_mechh
personal Instagram: alimechh
Рекомендации по теме
Комментарии
Автор

GREAT VIDOE!! Not super long and drawn out and informative thanks!!

dusteyrose
Автор

I’ve puffed a lot of dizank in my days but this got recommended to me. Sweet.

_Fish._Fish.Red_Fish.
Автор

Hmm. Thinking about that, will it clean AFR & O2 sensors, cat, injectors and the piston slug as well? What would you say?

sunjoomoontube
Автор

Dont know about others / but my check engine went on last week for cat bank 1…put lac in my tank with 5 gallons of gas and drove 30 miles and bammm it turned off… worth a try.. maybe a few times..

fcm
Автор

Another great video Ali.... Thanks so much

arash
Автор

I put some in a vw beetle 2004 it helped. No more hesitation.

onthetarmacinc.
Автор

Im an old mechanic
Here's a great trick if you dump a quart of atf in the intake with the cars running at high rpms it will stop the engine.
Then just let all the oil sit in the cylinders for 12 hr
Start engine the next day
It will smoke like a fright train
And all the carbon will be gone

garybrown
Автор

You can disconnect vacuum hose from CPV (crankcase positive ventilation) and dip the vacuum from hose it in and out of the lacquer thinner, which avoids putting in gas tank and having it going through entire fuel system hoses and injectors, but still will help clean piston heads, and the catalyst convertor. Helps avoid the solvent action on fuel line parts. It only goes into the intake manifold, then mix with incoming fuel to only affect the piston and exhaust system.

JoeZyzyx
Автор

LT is for cleaning cats. Water works best to decarbonize cylinders. Check out the an engine that had a coolant leak into one of the cylinders... That one cylinder will look almost like new...

weskirkland
Автор

Great Job Kaka, do you think that the Lacquer Thinner will be alright for cleaning the valves for GDI engines?

opecoassist
Автор

Is there specific type of lacquer thinner to use? Here in Canada we don't have the exact one you have. I went to home depot here and they have many options so I don't know which one to buy.

Honeybatger
Автор

How much dosage do you put lacquer thiner into gas tank?

arieyatno
Автор

Hi Ali, how much thinner you put with 3/4 of tank?

maxpoon
Автор

دەست خۆش بۆ ماندوبونت 🌹
بەس بیرت نەچێت تەنەر وشکە ئەگەری ھەیە زیان لە نۆزڵەکان بدات و جامی بکات یان حوڕی بکات

hiwamamin
Автор

White Spirit is the same as lacquer thinner?

MrRadicalad
Автор

دەست خۆش بیت کاک عەلی
چەنی جاری تەنەری تیبکەین
یەک لتر تەنەر بو چەنی بەنزین

SardarGulJabbari
Автор

I like to buy ...what site do you order..

NableVlog
Автор

Btw..after removing.where carbon goes..pkz answer must

hussainbangash
Автор

Oh yes. Lacquer thinner WILL eat carbon. I would take a quart/liter can and pour it slowly down the carburetors of my old cars and let them stall. Let them soak for an hour then start them up and drive in second gear through town at 4000 rpm. I'd get home running on half the cylinders (plugs totally caked with carbon) then change the plugs and the oil.
I'd be careful with a modern vehicle putting it in the tank with modern high pressure pumps tho. It can eat rubber and plastic components of your fuel system.

kelsycunningham
Автор

Is lacquer thinner eat rubber and plastic in fuel system?

PTran-nggl