Piston Carbon cleaning without expensive kit/Cleaning Piston Carbon buildup Carb cleaner/ALIMECH

preview_player
Показать описание
#carbon #alimech

In todays video i will show Piston Carbon cleaning without expensive kit and without removing
Removing engine cover for cleaning can be hard and expensive, so i did a test and showed that it worked and cleaned Piston Carbon buildup
i will be Cleaning Piston Carbon buildup with AUTOOL Kit, buy purring seafoam in to the canister and spray it in vacuum line and then put the vacuum hose back back and run the engine
but in this video i will do that without expensive kit
this prosses will push all the dirt out of the tail pipe
you can do that prosses multiple time till you see a good result, in my video i only did it once and there was a big differences

🔔 Hit the bell next to Subscribe so you don't miss a video!

Follow my Instagrams so we can be best friends
-------------------------------------------

Like my facebook page:
-------------------------------------------

**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos

Gears I Use:

For contact
Follow me
Instagram: ali_mechh
personal Instagram: alimechh
Рекомендации по теме
Комментарии
Автор

What I've done myself is unhook the fuse for the fuel pump and run the carb cleaner directly into the fuel rails, that way it also cleans the injectors as well as the internals of the engine.

platinumsky
Автор

Loved the video, especially the burning the tires sound effects. All the best, thank you

bludog
Автор

Thanks! Your way of cleaning fuel injectors and piston tops are excellent! Have you done any piston rings cleaning? Of course without disambling the engines, For the oil burning engines?

jrm
Автор

The piston was cleaned, the 2L suddenly showed up in the "after" image of the piston whereas in the "before" it wasn't there. Suggestion: if you do comparison of "before" & "after", make sure you take a picture of the same subject before & after the procedure.

nelsonmanuel
Автор

Is changing motor oil a must after doing this treatment?

lucidfairytales
Автор

Smart thinking good job thanks
First seen first like 👍

infinitifx
Автор

I saw the whole video I'm really impressed 👏 that's very informative a very direct well done Job Brother but can perform this either on a corolla or camry since the engine is bit different from the Mitsubishi if it's possible 😉

samueleyasu
Автор

Hi, for cleaning the pistons and intake manifold you did two videos where in one you sprayed carb cleaner through the pcv valve and the other through the vacuum hose. What is the difference, I am asking because I have a Toyota Vitz 2012 and sprayed through the pcv valve. Should I do through the vacuum hose on the vitz. Awaiting reply. regards

muhammadamer
Автор

Hi, so smart thought but Does the deferent temperature between the cleaner ( cold ) and the celender ( hot ) cause damage ?

SadKrm-mi
Автор

Which hose is to use
Is this the pcv valve vaccum that connects after maf into throttle body please explain

mikan
Автор

Any chance of igniting the carb cleaner during this process?

Frdzed
Автор

I want to that in my 2016 Nissan Rogue help me to find the location hose thank you

kayatzuke
Автор

the carburetor cleaner will only clean the intake valves.. It evaporates immediately and get burnt when it's in a running engine..
What cleaned the pistons was him driving like a savage..
You can clean your pistons by simply driving every now and then on the highway with high revs. The heat will cause the carbon to simply burn.

ukpkmkk_
Автор

I have a 2003 F150 with 4.2 V6. I bought it recently. I changed the spark plugs today. I looked at the piston tops with a camera. The rear piston on bank 1 and the front one on bank 2 had carbon buildup. The rest did not. Any idea what this means? I can tell you that I have been running Lucas fuel system treatment. I wonder if maybe those two spark plugs were so bad that it made the fuel system cleaner ineffective in those two cylinders. What do you think? There are no codes. The symptom I'm chasing down is pinging while accelerating. I can also tell you that there is pitting in the carbon buildup of the two pistons. I can also tell you that the two spark plugs for the pistons with carbon has white stuff caked up on the electrodes.

bradh
Автор

Thanks for the video, what is next if I did this procedure but the carbon in the pistons is the same? which other procedure can I try? thanks!

byroncasignia
Автор

a very good demo video... thanks! Question: can we use this process on any vehicle like 1KR-FE engine (Toyota vitz)? the cleaning via PCV hose too??

ahmedhamid
Автор

My 2016 Toyota Corolla which hose to pull out and put in the cleaner, I m at USA new jersey.thank you.

jordan
Автор

Ali, can you please list a link where I can order that super long red straw that would fit an aerosol can? Thank you.

kevinh
Автор

what effect does this have on the piston rings ?

donjames
Автор

Ali why Don't u spray direct piston?wish u healthy

ahmadalbab