This is How I Modified a Cobra 29 CB Radio FAST

CF Micro Repair, LLC | Dr Radio's CB Shop
21055 West RD STE 14
Woodhaven MI 48183

Open By Appointment
Monday - Friday


734-720-5477

"For the Lord is good; his mercy is everlasting; and his truth endureth to all generations."
Psalm 100:5 KJV

Also, If you'd like to support my channel,
You can donate to my Paypal!

**LINKS**

[scottwiseman]

Thank you for being humble and understanding without being condescending.
Great video Brother.👍

[DeakRivers-eqos]

The audio was flat.topping after the mode

[Maine]

THAT EASY? wow- 1- sending blessing to your dad, 2- i hope you do some radios and different stuff to the CBs?.. that would be wicked cool! have a great day thanx for the video!

[josearrasola]

Helllo sir, I hope all is well, I hope that dad can recover faster and my prayers will be with y’all everyday ! I just found out I’m going to be a grandpa for a second one my first grandson is 3 ! WOW how time does travel

[doffo]

I would look into doing the diodes in series near the transformer to bring the deadkey down in a 21, 25, or 29 cobra radios. My PEP watts out was the same when you talk. The cap/resistor trick made my audio sound distorted for some reason. Maybe it was the cap I used? Ran into your channel today from your response video to Northbridge Fix. Cool to see you like CB radios. Take care and 73.

[robertmaulsby]

Can you do a video on how to connect an oscilloscope to a cb step by step no one has done it

[Redsox]

In the great word of Mike's Repair.. Boxcars..

[glennlazarus]

Another great video Chase, keep up the great work 😁

[stevegordon]

Great mod keep the hobby going. If you want to talk skip you need swing. Clean and clear is great but you won’t get out on skip much. You don’t need a lot of power to talk skip but loud modulation will work. Yes it’s distorted but don’t eat the mic and it will sound good.

[caciqueguerrero]

Hello sir... I have a question just to refresh my memory.. before i made a power variable resister using the squelch on front of the radio ...but i never did it like that... Can i run some wires from the capacitor straight to the bottom??? Instead of the one you used .. thank you for your time nice and simple 73

[foxxfury]

I would just install a swing mod.

With a 220uF cap and a 100ohm, which puts the deadkey to 2.5w. Add in a 520 mosfet and itll do about 35w

[TheTarrMan]

Thank you for showing this. Any advice for a decent cheap RF wattmeter. The bird that you showed has a bunch of slugs that I would also have to buy if I went on eBay.

[drew]

Will this work ona cobra 29 ltd nightwatch?

[cajuncoinhunter]

I noticed your audio was clipping on your O-scope, Is your AMC still intact ?? I was doing those Super Mods to run heaters back in 1980's and the 90's when I had my radio shop in South Louisiana, I was using 33uF 35 volt caps and 56 to 68 ohm resistors, I never cut the limiting diodes out of the radios, I always used my scope for clean modulation you remember the roger beeps sounding like a fart sound then you just met the guy that helped invent story behind that modification

[djlunchmeat]

aah yes a super mod..dont you still need to align the transmitter as well ?

[websterzip]

Hi, Great video! What is the wattage of the variable resistor? Thank you

[davidcline]

Now hook it up to a spectrum analyzer and see the splatter across the other frequencies that you did. More modulation does not equal more power on a direct frequency. It just increases the power to adjacent frequencies.

[Sam-yspc]

I dont think I would be letting this guy work on my radio, but I would ask his directions on how to get to the nearest doughnut shop.

[DeakRivers-eqos]

is it me or was that radio KIPLING to beat the band that last klip when the amplutude modulation wave form was shown on the phone

[ssix]

How much current is going through that small resistor?