STM32 Bootloader, STM32F103C Programming using USB Port, STM32 LED Blinking, STM32 for beginners

Altium Designer:

STM32 Bootloader, read the article:

Subscribe to my New YouTube Channel, if you want to watch my videos in Hindi/Urdu

Stm32 Related Tutorials:
STM32 and Dht11 Temperature and Humidity Sensor

ESP8266 Lora SX1278 IoT Gateway for STM32:

Support me on Patreon and get access to hundreds of projects:

Project Description:
********************
If you are just getting started with the STM32 or STM32F103C which is also known as the Blue pill. This STM32 Blue Pill Module is based on the ARM Cortex-m3 STM32F103CT6. Although it has this micro USB socket but you cannot use it to program the STM32 board unless you Flash a bootloader and this is what I am going to explain in this video. After flashing the bootloader then you will be able to program the STM32 using a USB cable just like the Arduino Uno, ESP32, and Nodemcu ESP8266, etc. For demonstration purposes, I started with the LED blinking program. A HIGH signal will turn off the LED while the LOW signal will turn ON the LED.
********************

Amazon Purchase links:
*****************
STM32 or STM32F103C:

FTDI USB TO TTL:

Other must-have Tools and Components:

Arduino Uno, Nano, Mega, Micro "All types of Arduino Boards":

Top Arduino Sensors:

Super Starter kit for Beginners

Top Oscilloscopes

Variable Supply:

Digital Multimeter:

Top Soldering iron kits: "best"

Top Portable drill machines:

Jumper Wires:

3D printers:

CNC Machines:

Electronics Accessories:

Hardware Tools:

DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************

For more Projects and tutorials visit my Websites

Electronic Clinic:

Programming Digest:

Follow me on Instagram:

Follow my Facebook Page Electronic Clinic:

Follow my Facebook Group, Arduino Projects:

Email:

About the Electronic Clinic:
Electronic Clinic helps the students and other professionals to learn electronics, designing, and programming. Electronic Clinic has tutorials on Arduino, Arduino Nano, Raspberry PI, image processing, gsm based projects, Bluetooth based projects, esp8266 projects, Nodemcu projects, robotics, desktop application designing and programming, PLC, SCADA, RC Planes, Electronics, Power Generation, HMI, and much more. Check my Playlists.

#STM32Bootloader
#STM32F103CArduinoIDE
#STM32

STM32 BOOTLOADER
STM32 WITH ARDUINO IDE
STM32 BLUE PILL BOOTLOADER TUTORIAL
STM32 PROGRAMMING USING ARDUINO IDE
STM32 PROGRAMMING USING USB PORT ARDUINO IDE
STM32 GETTING STARTED TUTORIAL
STM32 PROGRAMMING USING USB TO TTL CONVERTER
STM32 BOOTLOADER DRIVER FOR WINDOWS 10
STM32 PROGRAMMING USING USB TO TTL CONVERTER

[supersantahibiki]

Wowwww thank you much. All I wanted is this and my board works now!!

[arifqurbanov]

it took my week and nothing didnt worked out. But after i getting 2 board didnt work, i made a research and noticed some boards has problems no matter how hard you try its newer works. So finaly i got my 3th board and it was normal one. I followed everyting in this video and everything works. I wanted to story if anyone gets specialy "cant init dervice" or something it may be the board not you

[gersonsoares]

bom video amigo, esse arquivo :generic_boot20_pc13.bin sendo instalado fica fixo dentro da blue pill ? mesmo dando reset ele não sai ? e so usar via porta usb e tambem via gravador st-link.v2 ? obrigado um abraço.

[pierre]

Hello, thanks for your nice video. I have a question please: I have an SMT32 onboard. It has a program inside. Is it possible to copy the program from it and burn it on another SMT32? What are the steps for that? Thanks a lot

[antoninomanfre]

Hello
Done all the steps, everything ok
STM32 now the green LED flashes, but the end of the loading, gives me this writing in red?

maple_loader v0.1
Resetting to bootloader via DTR pulse
Reset via USB Serial Failed! Did you select the right serial port?
Searching for DFU device [1EAF:0003]...
Assuming the board is in perpetual bootloader mode and continuing to attempt dfu programming...

dfu-util - (C) 2007-2008 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY
Couldn't find the DFU device: [1EAF:0003]


timeout waiting for COM14 serial


What does this writing mean?

[havva]

What is the type of cable you connect the USB TTL to the pc, I couldn't find a suitable end cable for ttl.

[akrammaouchi]

hey thanks for ur video, but im facing a problem in the finale setp when i try to uploud the program to stm32 the led not blinking and the led is in PC13 in the arduino output i fine this :
-A
Sketch uses 12804 bytes (19%) of program storage space. Maximum is 65536 bytes.
Global variables use 2064 bytes (10%) of dynamic memory, leaving 18416 bytes for local variables. Maximum is 20480 bytes.
maple_loader v0.1
Resetting to bootloader via DTR pulse
#
# A fatal error has been detected by the Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION at pid=10332,
#
# JRE version: Java(TM) SE Runtime Environment (8.0_301-b09) (build 1.8.0_301-b09)
# Java VM: Java HotSpot(TM) 64-Bit Server VM (25.301-b09 mixed mode windows-amd64 compressed oops)
# Problematic frame:
# C [jSSC-2.8_x86_64.dll+0xb5db]
#
# Failed to write core dump. Minidumps are not enabled by default on client versions of Windows
#
# An error report file with more information is saved as:
#
#
# If you would like to submit a bug report, please visit:
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
#

[wahithahussain]

Hi
after trying so many times, I'm still getting the pop up no response .. Can you please help??
I tried resetting still no hope

[kamranrashid]

I try but it is giving compiler error any solution

[petricabutnaru]

Please send me downloaded driver, i tried to download but archive is corrupted, thanks

[iforced]

"without any further delay, let's get started"
.... cue 10 seconds of intro-graphics delay lol

[fiandaja]

I do the tutorial but still get a trouble when the blinking code was done uploading, its getting a message from the arduino IDE saying "Acces is denied", is my STM32 Board write protected??.
please give me some advice.. thankyou

[Fubar]

Does any body recognize this problem,
sketch uses 12804 bytes (52%) of program storage space. Maximum is 24576 bytes.
Global variables use 2064 bytes (20%) of dynamic memory, leaving 8176 bytes for local variables. Maximum is 10240 bytes.
'java' is not recognized as an internal or external command,
operable program or batch file.

[rubenayla]

The arduino IDE gives the following error:

Sketch uses 12676 bytes (19%) of program storage space. Maximum is 65536 bytes.
Global variables use 2064 bytes (10%) of dynamic memory, leaving 18416 bytes for local variables. Maximum is 20480 bytes.
maple_loader v0.1
Resetting to bootloader via DTR pulse
#
# A fatal error has been detected by the Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION at pid=25172, tid=19368
#
# JRE version: Java(TM) SE Runtime Environment (17.0+35) (build 17+35-LTS-2724)
# Java VM: Java HotSpot(TM) 64-Bit Server VM (17+35-LTS-2724, mixed mode, sharing, tiered, compressed oops, compressed class ptrs, g1 gc, windows-amd64)
# Problematic frame:
# C [jSSC-2.8_x86_64.dll+0xb5db]
#
# No core dump will be written. Minidumps are not enabled by default on client versions of Windows
#
# An error report file with more information is saved as:
#
#
# If you would like to submit a bug report, please visit:
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
#