How to Replace Front Sway Bar Links 07-10 Hyundai Elantra

Buy Now!

In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 07, 08, 09, 10, Hyundai Elantra

🔧 List of tools used:

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[AAuto]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[clyderamsumair]

Great instructions, saved me money doing it myself, thanks!

[momo]

Would this be the same for a 2012 Hyundai elantra or is it different?

[thomasivan]

Where did you get those vicegrips, and what are they called, I have never seen them before.

[erickschindler]

I want too know what it looks like under my 2007 hyundai accent near the sway bar

[whyidontknow]

How many ooga doogas to properly torque the endlinks?

[Thedudeabides]

What if you have only one side of the car jacked up at the time does that put pressure on the sway bar link that you're trying to remove?

[alfahiminer]

Do they need to be greased upon installation?

[ryanpilkington]

Do you have a video on the front sway bar bushings?

[carlovincentvicedo]

What if I just unhook my sway bar and I need to play back what the torque specs I need to put in?

[Bustahymn]

I noticed online that you only sell front sway bar links for the 2012 sedan but you sell a bundle for the wagon. Is there a reason for this?

[lexter_santiago]

What is the stud bolt size 10MM or 12MM?

[ahmedelrashidy]

Can I replace the sway bar itself from any of the car sides without disassemble any more parts after talking off the links ?

[yanuck]

The Locking Pliers link in the description are not the same then you are using in the video..
Those are in the link are too large to fit.. can you tell me where to get the same Locking Pliers then the video?

[yopeople]

That bottom bolt sounds like a pain in the dick and balls to extract. I have a friend who didn't have an impact gun and he had to hammer away at that thing for hours to get it out.

[smmaverickm.]

Acabo de hacer esto a mi Elantra 08 front and rear Detroit Axle brand

[ilikedonuts]

Do you need to steering alignment after this ?

[ureasmith]

Great instruction. Part looks substantially thinner than the stock. Not sure it makes a difference.