Home Depot Gutter Guard

A professional DIY gutter guard made from stainless steel micro-mesh and will keep leaves, pine needles and even tiny roof sand grit out of your gutter. Manufactured by Gutterglove, Inc., the leader in stainless steel micro-mesh gutter guards.

Gutter Guard is the most efficient and cost effective Do-It-Yourself (DIY) gutter protection system on the market.

[ColinStudentoflife]

Using for a year now. Had a handyman buddy come and install them. Been working great but haven't experienced heavy rains.

[patrickfreeman]

Installed them myself….easy job even for a 76 year old!

[joelabore]

After 3 years mine are working great. Bought them at Costco. Installed myself. Its very easy. I have a steep roof so needed to put a bend in the screen. This does allow some debris to accumulate but not much. On the south side I have a western red cedar that is always dumping something. I clean that about once a year with a brush from the ground the biggest issues is inside corners. My cedar dumps so much debris I have to clean that one inside corner almost monthly during the winter. takes about 5 minutes which includes pulling out the step ladder but that is still much less work than having to clean the 200 feet of gutter twice a year. Installation is about 4 minutes per straight section and 10 minutes per corner section. A cut off tool works much better than a sheet metal shears.

[ValeriaRodriguez-ctqh]

"You won't get a heavier rain than this" yes you will. Rain hits your entire roof at once, then accumulates as it runs down. I have used gutter guards on all my houses and they work great....but that was a stupid thing to say. And yes, needles do sometimes get stuck from my many pine trees, but the needles dry and break off in the next wind storm, but I don't have anymore maple trees growing out of my gutters or leaves clogging the gutters.

[MikeRoeser]

The main negative for me is they drip. Heavy rains cause drips all the way down the gutter that I never had before. However, its better than cleaning the gutters.

[jerryw]

I put Home Depot stainless steel micromesh Gutter Guards by Gutterglove on my home about a year ago. If you have a one story home it is a cake walk to put them on. I installed mine using a step ladder. Gutterglove is a great company and will offer you the best customer service there is. They have a great video on how to install the gutter guards also on YOUTUBE. Also, you will get a great instruction booklet with your order. I was able to install almost all of mine with the one side under the shingles. The self tapping screws which i choose to use works great. It is a big cost savings if you do them yourself. I only did the gutters where there are problem areas with leaves. I did not see any reason for installing them where there is never a problem like my garage was. Gutterglove gave me a free gutter broom to clean my gutter guards if it was ever needed. Now that I am older I do not have any worries with gutter stoppages! A great warranty too.

[Mrtzhmd]

Pine needles will get through the holes and also this system will cause you some serious ice dam in winter

[MrChappy]

...and the debris ends up where? I believe it blows off, sticks to the house siding, resulting in more cleaning elsewhere.

[atomicpunk]

if you are going with the adhesive tape only i recommend wiping that lip on the gutter.

[benbonesalive]

I like to pull fabric screen off because of water shooting right over guard and flooding basement.. yes it happens with gutter guards .. you still have to clean them .. this all depends on roof pitch and where you live also .. trees etc etc.. do not ever use the leaf guard system unless your in Arizona

[fluffylittleclouds]

Great, so how do I hang icicle lights during the holiday season without damaging the fine mesh gutter guard? Other videos show metal hooks that fit through the gutter guard, but the style shown in those videos have bigger holes to fit the hooks. Give me a solution please.

[rceqjqf]

great video, but what can i do about the little space between each section, any recommendation so the debris doesn't get caught up on the rough edges?

[lauraatkins]

I get ice dams build up in the winter, should I remove the guards after the leafs have fallen?

[Alan-yoga-teacher]

Not one person who installs gutter guards can avoid cutting them to go around corners. This video should show how that is done. Very tough to cut the steel mesh type of gutter guards!

[eyeonart]

I saved $9, 000 dollars today by not buying leaf guard or any other guard.

[rps]

You just lifted the friggin shingles, Good luck with water and ice dams!

[SandraKay-vlel]

Anyway to make them fit a 4 inch gutter???

[tvelazqu]

Sad it didn't show how to for asphalt shingles!

[Observer-gvby]

If it's raining bad, will the rain go through the mesh into the gutters and down the spouts or will it be slipping off the guard and down on to the ground?I

[kcmaldonado]

I bet they work great. For the first year. Not so much after.