Level Your Bed FASTER with Eddy!

00:00 Intro
01:09 Updates!
01:39 How it performs
02:34 Hardware install
03:12 Firmware
05:47 Config setup
09:58 Should you buy it?
12:08 Okay, but really, should you?

[thmo_]

that intro made me chuckle way more than I was expecting

[Krautech]

Hey look my guide still getting around 😅 atleast its nice to see BTT maintain it.
Good video 👍🏻

[calmac]

I feel exposed by that intro ;) Thanks for the intro on the Eddy!

[SlydogUTube]

perfect timing, I'm about to update a few of my printer to either btt eddy, beacon, or cart, just not sure which yet.

[EIEIOOOOO]

Those Voron colors are sick! Can you drop the filament link?

[Garage]

I was between this and a MicroProbe V2.0 recently. I didn't go with Eddy, mostly because of dealing with different bed plate surfaces and the added BTT Klipper complexity. I know the firmware isn't a huge deal and they are gonna merge it back into main Klipper ideally, but still some added time and effort. I also don't really change build surfaces often, but the probe just seemed to remove one more small pain point there. The other reason I went probe is what you mentioned near the en. Ideally you don't need to bed mesh for every print, especially if you use KAMP. So the added speed wouldn't really be a massive benefit. Still a really excellent bit of kit, especially for the money!

[jamesm]

Eddy with kamp is the way. I use cartographer probe and kamp at 800mm/s scan speed. Perfect layers perfect mesh.

[danhabecker]

I was going to say, 'bummer there is no CAN version'. But it looks like one is coming soon. It would be nice to keep the wiring clean since going through changing over to CAN.

[MarkusIngK]

Hello, thank you for the great video. I have a Proforge 4 with 4 printheads. Here each individual print head is adjusted using its own process. How does the Z offset work? Everyone has their own configuration so that they all work together? Thanks and greetings Markus

[scottsparks]

Hi, first excellent details, very well done. I’m looking for a probe for printing in an enclosed space with ambient temperature around 60-70 with a wham bam magnetic plate with a pex spring steel on top. Do you know if the eddy probe would work with my setup. Thanks for your time and great video. I will surely check out your other videos.

[Elliot]

I'm not sure if you need the BBT branch any more, its not clear. I wish I got a cartographer as they have tap in beta now.

[Armored_Turtle-RK]

As someone that has a bl-touch on all his vorons, i feel attacked at 0:08 🤣

[corey]

stupid question but do I plug the usb version into the pi or my octopus? thanks for the video!

[otaviogoes]

You can use 2 wires to usb communication and get 5v and gnd from toolhead

[borys]

hi! I also started using Eddy!
I have a problem when I print parts with a grid from Eddy. The height of the printed parts increases by about +0.6 mm. What could it be??? FADE is off! If without a grid, all the dimensions are perfect!

[Steves_D]

No matter what I do I can't get eddy to save my variables

[alexanderwiltschek]

i wonder why nobody plugs in the usb cable side when pressing the boot button 😂

[fettfoen]

Which Eddy do I need for a Voron 2.4 Stealthburner? Eddy or Eddy Coil?

[ShawnHawkins-]

I bought the Eddy and tried inatalling it on the gatry bracket I bought for the stealth burner and it wont fit with the phaetus rapido hotend installed. Im really bummed out

[CoreyStup]

Looking to see how well this would work on a SV08.