How to jump start using your NOCO Boost GB70

Learn how to jump start using your NOCO Boost GB70 UltraSafe Lithium Jump Starter in three simple steps.

Find more helpful information at:

[stacyhunt]

Had to watch this video to learn how to use my Noco for the first time and it worked like a charm. Thank you

[bscrecoveryrescue]

One of the best units out there....we have them in our vehicles... you cant ask for anything else ... NOCO thank you

[af]

I was recommended this unit because I live in a cold climate, and for me this is primarily a backup for really cold weather. My car is only a 2 Litre diesel though it was -22C yesterday and it just would not start. I hooked up the GB70 for the first time, and it started first try with no issues. This is exactly what I needed because when it get cold it doesn't take more than a couple-three tries before the battery starts to struggle to deliver what a modern car needs for all the electronics and what not. Personally I've quit using the engine preheater, because it just drains too much of the battery. I'd rather have the car start, than pre-heating the engine and the rest.

I recommend getting something like this before you need it, because it is so frustrating to stand out in the middle of nowhere in -20C and the car just dies on you. With this unit you got a very good chance of kicking it back to life again, and that is worth every penny.

[jmmusicplaytime]

I was getting worried when my little Fiat 500 wouldn't fire up. I tried 3 or 4 times (the charge LED lights were "chasing" and the boost LED light was on). Then I remembered to turn off the central air inside the car ... as soon as I did that, she fired right up. 😀 Very pleased with this unit.

[wapahu]

I’ve had this item for the past 3 years. It’s an amazing product and I live it!

[iain]

It should be pointed out that with Mini & BMW vehicles (later models with IBS / Intelligent Battery Sensor), use the negative terminal ON THE CHASSIS, * NOT THE TERMINAL ON THE BATTERY*. By by-passing the IBS you can damage the battery & ECU.

[mikewright]

does it matter which way you remove the clamps?

[DaveElby]

I tried to use mine today for the first time and all the Boost would show was a flashing boost light (no manual override selected) and the first red LED on the charge cluster. What does this mean? When the LED's were in this status I could not select manual override by holding the button for 3secs.

[georgegiannopouloscamarozl]

I have the same I can't start my 6.2 liter ZL1 I don't know why

[a]

I had my NOCO Boost GB70 UltraSafe Lithium Jump Starter for 5+ year now and tried to use it probably 40 times, not once ever has it been able to start ANYTHING !!! It just blinks like in this video and make a click click click sound. The cars I have been trying to start is all small engines with a flat to almost flat battery that could barely turn the starter. When I connected the start boost nothing happened. I have now used more on calling road service then this horrible expensive crap that do nothing ...

I now use instead a 90AH start battery and jumper cables as start booster when I need it.

[Erevoking]

in this video you connect the - 1st then +....silly