How To Fix Non Sticking / Warping / Curling 3D Prints

Be sure to Subscribe With Notifications for more!

Sorry for the Blur Box, had a non-youtube Friendly print that was ordered and never removed it :)

Check me out on

Other YouTube Channels

Add Me On XBOX
MADHITMAN SSWI

[hennke]

I love that he's using a fisheye objective for showing warp, haha

[Akshdifbajajld]

This is great advice! I'm glad someone else was experiencing the same problem with the Flashforge Finder's leveling and was willing to share an answer! The test file has worked very well for leveling the plate.

[rachet]

This guy is great for solving your problems. Definitely subbed

[jofennstam]

Having the same problem in just that right back corner. Try to do this with our finder 2.0

[ViralKiller]

Im using double sided tape and the fuck still keeps on curling off it....what the fuck man

[QuebecoisSti]

Done blue tape with glue but with larger object the tape lift up and the part warpimg anyways... some says to print directly on glass bed with glue or spray

[carolynmcpherson]

We've tried every one of the leveling and bed-cleaning techniques. What to do when we have a curved corner on the finished product.?

[VRietySociety]

A: don't touch your bed with your fingers xD seriously man. The oil from your skin is not your 3d print's friend. B: with pla most warping issues are bed level issues however if you print nearly solid parts in certain shapes then your print might warp even if your level and surface are perfect due to the stresses caused from the contracting layers that are cooling down. glue stick is fine but dont use hairspray -

[tinkot]

I have best results by not touching the build plate and cleaning it often. You wipe off all oils, you can't physically see those oils unless you're building straight onto glass.
isopropyl alcohol works fine. I use a build plate and I often use aceton which makes it extremely sticky. this is because it has effect to filament particles from previous prints, those particles blend into the build plate. take note that using aceton wears out the build plate faster

[fakumadda]

Even if the bench was on a slant it wouldn't matter as level involves squaring up the bed with the cross bar.

[MaxvanStraaten_]

Thanks Dave, You helped me solve my problem with this video and the test file 👍🖨

[akosszollosi]

With this kind of bed more junk your previous prints have left behind the better it sticks. Don't clean, don't touch. Otherwise hairspray, a glustick works really well, or just about anything sticky you can put on there.

[roadstar]

So does the purple glue really work? how much you put on...how long do you wait after before you print? thax

[aidenthayer]

Can you put painters tape on a heated bed?

[triggerhappy]

I know this video is 2 years old but for anyone watching as of right now, another recommendation is to use hair spray, I foud this really helps with warping. Take the spray and spray it onto a paper towel, then rub it onto your bed.

[gillesbisson]

The linked file is not the same one. Do you have the link to the actual file you used (6 squares and the outline) ? Thanks !

[Slinkeymac]

What brand of filament is that? and thanks for the help

[Pilotkosinus]

thanks youtube advertising policy that i have to watch a 10min video to get info that fits in a 60sec clip.

[ConsultingjoeOnline]

_LOL_ you do sound like *Will Smith* . haha