Using Low Price Resin Printer to Print Highly Detailed Jewelry

I will show how to used an Elegoo Mars printer to print some very detailed items that your could use for casting. I also go over the 2 programs that you could use to design you work.

Buy Now, Pay Later with Abunda:

3D software:
or

Slicing Software for the printer:

If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:

*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*

----------------------------------------------------------------------------------------------------------

If you would like to directly support the channel you can do so in a few different ways.

1. Like, comment and share my videos

4. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.

#elegoomars #3dprinting #resin3dprinter #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy

[GomeowCreations]

*I was wrong about the discount in the video, the discount is for the resin*
This code is good tell 05/31/2020 11:59 PM PDT


3D software:
or

Slicing Software for the printer:

If you are looking for other tools, materials and discounts check out these links:

Tools and Materials -

Discounts -

*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*

[sdunca]

3 items of note- 1: Your platen for the printer is anodized aluminum- use a plastic putty knife vs anything steel on the surface- 2: when you use the UV cure light please use an enclosure- reflected and ambient UV (Although it is much less) can be an issue (As well make sure the spectrum of the cure light is the same range as the printer UV source). 3: Bravo on this process- its a great medium for replicating and prototyping! (And I agree with DAHIGI about using the platinum investment) I personally use this for my master then silicone a mold for shooting waxes.
Bravo and good content!

[Dr.Ratio]

Underestimate video! This deserves more views and likes

[DontAskHowIGotIt]

grow media is tricky to burn out properly when you have very fine detailing. it's best to use platinum investment so your final burnout stage can reach 1800 degrees. it's also less apt to break off small pieces when your pour the metal

[GJairo]

I’m thinking about starting a jewelry and a clothing brand and currently learning how jewelry works all this is helping me understand this more easily but jewelry seems hard not gonna lie (:

[FLOOPC]

I love your videos by the way man fantastic content and clear delivery 👌👌

[juanhiriart]

great video great stuf!!! thanks!! quick question, how do you know when the resin piece is cured exactly? thanks again! hope you get this message

[theman]

Good stuff, I've been experimenting with casting resin prints for the last few months. I've gotten some good results, but I still need to get some things like a proper oven and vacuum table. I've been using the Form 2 and it produces amazing prints, they even have specific resins made to burn out of molds that are mostly wax.

[gad]

Hola, una consulta, el cepillo de dientes no queda contaminado, despues de usarlo para limpiar las piezas?
Se puede seguir usando como cepillo de dientes?

[arlindislami]

What is the best cheap resin to cast gold in it though, cause after your review i definitely wanna go for Mars 3 Pro, its just it seems i cant find for sure some instructions whats best resin for casting gold directly into it.

[megangoldner]

Thanks for sharing. Do you know if the resin will release VOC's while being cured like normal epoxy, or will I need my full PPE while working in the area while it's printing?

[rizgems]

Hello. may i know what resin type or brand to by if i wanna to print casting Jewelries Thanks

[evonnesawyer]

Hi what are the settings you use for castable resin on the elegoo mars

[sabrahardy]

I am a student with logistics issues. I live 8n a small apt. Other than fine .999 silver I am not permitted heavy tanks in ky small residence. I had an Idea: using my Rhino software i use my 3D printer make a positive jewelry piece asvwell as a negative of the same as a mold. If the mold is about 6/8 around dimentionally I can use a PRECIOUS METAL CLAY and a klin. Precious metal clay hardens. Once that happens klin firing is between 5% - 15% shrinkage for the organic clay to burn away leaving metal. I can place the Precious metal Clay in a Delft clay investment cylinder does that seem workable? A 3D printed mold negative from my original jewelery print, Precious metal clay folded in removed once dryed hard -- placed in a clay investment tubing and klin fired??

[josuerizo]

Those it have to be a resin mold? Can it be any other type,

[kekeke]

So is resin printed parts wearable or not? I found sources say it will definitely kill me, other say it wont...

[Saywhatohno]

which is resin is best for casting jewelry?

[MemleketimTurkiye]

Thank you for sharing, your videos are worth watching.
I liked it. I am waiting for you for my last share.✔👌👏👍126

[AugmentedPixel]

I’m used to using sketchup pro for work can I export models from sketchup pro as stl files?

[FLOOPC]

Hey mate! Fantastic video this has given me sooo many ideas. Can I ask you a rough estimate of price for a set up including the printer (I've found for 233) alcohol/UV light/ anything needed to send these as pieces to my caster ? Many thanks in advance