This is spray paint? Quality paintjob for your car/truck on the cheap

Rustoleum came out with the 5 in 1 spary paint cans and ive noticed people making claims that you can paint entire cars with them. Is it really that easy or is it all smoke and mirrors? Lets find out! Please subscribe to my channel and hit the like button so I can keep making content! This paint comes in a ton of different colors and some of them are really nice.
Here’s a link to the paint I used, the gloss colors are nicer in my opinion.

[zachf]

Hood looks great. One tip that I was taught is…when applying multiple coats of rattle can base coat…before the last layer of base, do a very fine grit sand to remove any orange peel, dust or debris. (3k and up depending on debris). Then follow up with your final base coat. This helps with levelling of the final pass and ensuring the last coat has the least amount of contamination.

[loadedfun]

I painted refurbished helicopter parts for forestry service and military. The most important thing I was ever taught about spraying anything is to spray your most difficult areas first. Everything else starts to fall into place after that.

[codydonovan]

Hit that hood with some Spraymax 2K clear!

[michaelramsey]

I probably wouldnt try to do a complete car this way, but for a panel repair/replacement on an older car, it can be a great option vs leaving it alone or paying a pro to do it.

[Surroundedbyevil]

Wow that hood looks awesome. Thanks for the video.

[VintRestGarage]

You did a great job for rattle can, and yes I would.

[ariesanfilippo]

Not for nothing but i think im going to try this. Great presentation and thank you for sharing your experience and knowledge! Definitely subbed!!

[mungobrass]

Thank you for sharing, it turned out great I thought. I'm hoping to do my small box trailer soon so this is perfect

[geezer]

Thanks for showing this, the hood looks great.

[danieltaylor]

Looks good for a home paint job. I would probably put some clear on it before sanding/polishing to make it more durable.

[gangstabunnylyfe]

Yes I will you are such a good teacher😊

[daveerrington]

Absolutely. I’ve had jobs that turned out spectacular especially after wet sanding it and buffing it if you want to go crazy put 2K clear over top.

[gregorygetable]

Nice video. Perfect for my tired looking 1947 Willys jeep as it will not be roughly used but still near twigs etc on dirt roads in the Berkshires. Thanks very helpful

[MDFRfiredriver]

Good job. Yes for my daily run about. Rattling can paint is good

[MadR]

Great result for a diy job in your own garage, more practice & prep work will only give even better results, well done 👏 good video.

[jeffreydixon]

I like that color looks great from here thanks for sharing 😎

[jerrytalley]

One other health tip, get a respirator. You’re filtering out paint particles but not the toxic fumes. That stuff will kill you.

[scottallen]

Nicely done. Old vehicles need to look decent and be protected from rust. And you get to have some fun with it. And, you are saving a few thousand dollars!

[herewegoagain]

Looks pretty good man. A friend of mine did the same.He put cans in warm water and it flowed nicely. Then finished it with 2k clear. His trick was he sprayed with two cans at the same time to get a wide fan and keep a wet edge and minimal tiger striping. Then buffed it. It also looked great and lasted a few years till he got rid of the truck. Disregard the negative comments souch nicer than it was

[djneil]

Looks pretty good ! I personally never got a high gloss shine from a cut and buff using a dual action sander. A wool pad and a straight buffer generates the action needed for the best gloss.. nothing to be ashamed of there turned out nice.