How To Make Your Own DIY hydroponic 🍀☘️ System AT Home

preview_player
Показать описание
in this video I'm showing you step by step How to make Hydroponic system at home Things required ;
-4 pcs 4" PVC pipe each 3ft
-8 pcs end cap -
-8 PT Elbow 15 mm
-8 pcs 4" pipe clip
Stand Things
-4 pcs Elbow 36 mm
-4 pcs Tee 36 mm
-12 ft. long of PVC pipe 36 mm Cut the pipes.

Hydroponic PVC – Do you want to grow your own plants but you don’t have enough space in the backyard?

Do you live in a condo thus you don’t have any backyard to grow veggies?

Then you can build a hydroponic PVC system.

It is a clever way of growing plants on a small area without exerting much effort.

It can hang on a wall or a fence, meaning you don’t need to have a garden to pursue your hobby.

#Hydroponics is a word derived from two Greek words.
Hydro means water while panics is a word for hard labor.

Hydroponics actually goes along way back, as the ancient Egyptians and Aztecs were said to be familiar with the principles of growing plants in water enriched with nutrients. A hydroponics system based on metal or plastic can be very costly.

PVC, on the other hand, is very easy to put up because the low price of the material.


If you’re looking to create your own hydroponic system at home, you’ll be attracted to the low price of PVC that leaves you with enough space for error and tryouts.

Another advantage of PVC is its efficiency.

PVC pipes are lighter than other hydroponic system materials like steel.
Thanks for watching , If you like the video
thumbs up and subscribe
#DIYHYDROPONIC#hidroponik#hydroponicgarden

It is also not toxic and soluble.

Plus, hydroponic gardening systems that make use of PVC pipes perform very well outdoors notwithstanding different weather conditions
A hydroponics system based on metal or plastic can be very costly.

PVC, on the other hand, is very easy to put up because the low price of the material.

If you’re looking to create your own hydroponic system at home, you’ll be attracted to the low price of PVC that leaves you with enough space for error and tryouts.

Another advantage of PVC is its efficiency.

PVC pipes are lighter than other hydroponic system materials like steel.

It is also not toxic and soluble.

Plus, hydroponic gardening systems that make use of PVC pipes perform very well outdoors notwithstanding different weather conditions
Рекомендации по теме
Комментарии
Автор

I would drill holes first then seal ends. Easier to clean out plastic pieces

beverlybauer
Автор

Wow simply amazing....yesterday I visited hydroponics farming near to my place and instantly I fell in love with this hydroponics. ..And I have started searching for diy setup, and I got it in this video..

Thanks a lot for sharing ...

rajich
Автор

Most of the drillings could done before you glue the end caps on. Just a thought for convenience sake.

hughjukok
Автор

Many and many thanks to you for such a simple but helpful video
--- Kishore, New Delhi, India

kishorekk
Автор

I tried this idea for my sons school project and got first place thank you I will subscribe to your channel

Messxxi_editz
Автор

Very good CongratulationsI like it very cleverly imaginativeVERY clever bravo super👏👏👏👏

zoltanvirag
Автор

bro i like your video's. im going to try all this and more thank you im going to star a garden pretty soon. God bless you.

mariodavila
Автор

I would suggest screwing the pieces on the end caps before gluing them to the pipes.

jaredgaiser
Автор

You’ve perfected the two finger in them hole technique 😉

smallestviolin
Автор

Hi sir ading journey tv galing ng ipinost mo hydroponic garden pwedeng kong gawin yan thank you po godbless

ellendellosa
Автор

would it not be better to leave one end open to get out the cuttings from holes first, then seal both ends

origamidad
Автор

I'm curious why you didn't route the water pipes so that is pumps into 1 end and travles through all 4 of the 4" pipes before exiting.

jeffw
Автор

Thanks for the video, I have some questions:

1. How do you balance nutrient A and B and measure concentration?
2. Do you have issues with mosquitoes in the water tank?
3. Is this an NFT method or a type of DWC? i ask because the water pressure seems high for NFT.

KaniaaseelanHarishSivaseelan
Автор

Dear please make video on nutrition supplements, it's essential, set up to koi bhi bana lega nutrition kaise dena hai, from 1st stage to harvesting tak iska video banao

dineshchaudhari
Автор

To anyone reading this, I hope you have an amazing day and stay safe!

infinitymusic
Автор

A lot of that could have been done before gluing on the ends. Would have made it easier.

bonniechilders
Автор

I believe you can even cut pool noodles into pucks and use those to hold the plants... I've never tried that, but it's on my list lol

mackenziegier
Автор

i would interconnect middle two pipes together, then give only 1 input water, so the water fully circulates

junaidsiddiqui
Автор

would have been nice for you to indicate what he brown balls in the grow cups with plants are.. and their use. Also, is it plain water or does the water have nutrients added? thanks for the video on the stand and pipes!

denisemsummersett
Автор

Hi! Thanks for this informative video… can I ask what are the little plastic cup things you put the clay pebbles into please?? (They fit perfectly into the holes)

BroadwaterPharm