How To Output One Audio Source to Two Devices on Windows

preview_player
Показать описание
In this tutorial you will learn how to enable the sound on two audio devices from one single source.

I'm using two headsets, one is connected to my computer through a 3.5mm jack, and the other one is USB connected.

This tutorial is made on a computer with Realtek soundcard and Windows 7.

Enjoy!

Рекомендации по теме
Комментарии
Автор

Thanks bro, your idea didn't exactly work but it gave me an idea.

First - Make sure you have stereo mix, ... If you don't then you have to look for the (stereo mix) driver online and make sure it's compatible with your pc/laptop.

Then once it's downloaded and installed, I had to make stereo mix my default device under the "Recording" tab in "Sounds."

Then make the headphone plugged into the front 3.5 mm audio jack of the computer my default device under "Playback."

justbme
Автор

My on board audio does not work with this method, but I did manage to use this method to get my mic to output to my HDMI tv sound to cut out my feedback! Thank you very much!

jeraldroethler
Автор

To all the people asking how to reduce the delay, you need to buy a 3rd party sound card if your device does not have one already. The hardware on most windows PC's can't support realtime playback on two devices at once without the added hardware. Additionally, most soundcards will come with a 3rd party software that will allow you to configure all of this from within their interface. If you want to play through two devices at once with no lag, you must download the program "Voice Meeter", this is donation only software, but it works so well I that I suggest everyone donate.

geologyguy
Автор

Thanks dude.. i have fixed an age old problem in my computer with this video.

bitkhtz
Автор

Thanks for this. to the people getting lag, I think it is most likely in issue with your device getting a delayed signal, to which i suggest you either improve signal strength somehow, or get a better device.

BzCoTV
Автор

This worked great for me! I use Win7 with a Korus V400. I have my Logitech Z2300 sub & speakers in the living room while the V400 plays the same music in the back bedroom. A small bit of lag is evident if I stand right between the 2 sources but that just makes a live show sound even better. Thank you for this very helpful video!!

UncleAL
Автор

You explained this very very very well. I watched two other videos and didn't understand the part about the DEFAULT and the other. So, my audio output seemed broken for both those attempts. YOU HELPED ME SO MUCH! I hope you can hear this in two outputs. THANK YOU, THANK YOU!

ronancho
Автор

Thank you very much. This helped me out, now I can have my speakers and my headset plugged in at the same time!

Pwrswitchd
Автор

Great tutorial! Totally useful for me in my current setup!! I had no idea it could be this easy!

MarkHnathBabar
Автор

Thank you, I've been trying to work this out for a while on my own to no avail, and now it works!

kurtk
Автор

will this work with 2 monitors hookes up hdmi and dvi? cause im trying it and its not working

wizardz
Автор

Holy Crap Batman. Ive been looking for this solution for years. Wow, everyone said it was not possible. Thanks so much! Very surprised it was so simple. Not great for multiple speaker sets, get a sound card. But exactly what i want for headphones and speakers. Great for recording or gaming when friends are watching (while still getting all benefits of headphones)

LesskoBrandon
Автор

Awesome this worked a dream, I set my second device as my TV, connected via HDMI and it worked. I had read elsewhere that it couldn't be done, so thanks buddy!

OrlandoHarrison
Автор

Thank you very much!!! Now all I need to know is how to make both microphones from each headset to work at the same time...

SangriaDracul
Автор

Yo, thanks so much for this, I literally spent hours trying to figure this out, subscribed!

AnudeepDONDONDONRlol
Автор

Thank you very much for help, simple and quick video

Annggeell
Автор

Worked like a charm, thanks a lot mate

a.r.
Автор

Exactly what I was trying to figure out. Thanks!

motobene
Автор

sie, already follow instruction, but still no audio playback at my tv. But have sound when "test". Any other solution?

PaidiHasan
Автор

thanks man i was looking for a solution for a long time, i know this video is like 5 years old but i never thought asking the youtube how ot fix it hehe, !

constantinefwteinos