2010 Ford Escape - P0443 Purge Valve Diag / Replacement, Sway Bar Link Taping Replacement

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

You the man.
Thank you!
You're the only one to show the 3.0L V6 purge valve location on the 2nd Gen Escape!

fl
Автор

You’ve come a long way with your videos brother!

retiredafce
Автор

Crazy, having some acceleration issues, no CEL, tested the purge valve just like this and yep, there is vacuum. Annoying little piece but thought it odd I didn’t get a CEL. Been driving with this issue past few weeks, spent those weeks trying to diagnose the issue

schizt
Автор

Thanks for showing the purge valve. Whew ... I see all the corrosion, there is zero none nada zip here in the Calif desert.

jeanjeudi
Автор

Can that valve cause gasoline smell under hood?

az
Автор

My parents 2010 Escape needed sway bar links as well. Bad clunk for a while.

lmCIoudz
Автор

I don't know where you're located, but I want YOU working on my vehicles from now on! awesome video!

damnitsmatt
Автор

Hi I have a 2010 Escape 2.4 4 cylinder. I have had a evap code for a wile. And today the engine stumbled and began to idle roughly with no throttle response. Could this be a symptom as well I tested and I think I feel a very very slight bit of suction possibly.

ericnewberry
Автор

Hi @Ty! Same car and same problem. FORD ESCAPE 2010 FLEX, only 93K miles. it’s been sitting for 6 months. First ENGINE LIGHT came on and I couldn’t pass Smog Test, they said O2 oxigen sensor was not activated, gave code P0443 and then after many cold starts and driving slowly on the highway it passed Smog Test. A/C only gives hot air and not cold air. Before ENGINE light was on and off but now it’s permanent. I can feel the car losing performance. Unfortunately I can’t afford a mechanic now. HOW DID YOU RESOLVE YOUR PROBLEM? Any advice? Thanks

lourdyregis
Автор

This can't be valid! Where's the $5, 000 scan tool? The proprietary IDS? The smoke machine? This is blasphemy. Or you're just good at what you do, sir. Very well done.

marathonfreak
Автор

It's so funny 🤣 my Purge code just popped up on my ford fusion


I had a question this my second time replacing it after only one year use
Any reason why

fitstoned
Автор

hey, while were on the topic of Purge Valves. Where is the Purge valve on a 14' Explorer Sport TT? If you don't mind me asking. Some people say its near the firewall, then I hear its above one of the mufflers. I just don't see it. I have the motorcraft part exactly like the one in this video. Any help would be awesome. Just doing some preventative maintenance, I hear these are problematic. Its cheap, just change it. Spark plugs next. I have the full service history from ford on this vehicle. I don't think Purge valve or spark plugs have been changed on that report. I'm using Motorcraft sparkplugs as well. After that oil change. I'll do my own. Then I can use a Wix filter. I use Wix on everything. Lawnmower, Harley, Everything. lol

ronnieschmidt
Автор

Hey, I have a 2015 Transit 350 and the dealer wanted to charge me $490 to change out the purge valve. My jaw dropped. I looked up how to do it and changed it out in 5 min with a $25 part. How can Ford charge $490 for that service? Pure robbery.

macmuchmore