Burning Ignition Coils, Electrical Problems, Idling Problems Nissan 350Z/G35 SOLUTION

Hello guys, since Ive seen my last video helped out a lot of people I decided to make another one explaining issues ive had and what ive done to solve them. Ill be uploading more videos soon about other guides and updates of my car. Thank you for your support.

[exige]

That is very helpful...they have JDM "Grounding Straps, type kits" out in the aftermarket community to help these problems! Thank you, Zapata...great video!

[vqkel]

have a g35, brought at least 3 to 4 crankshaft sensor & they all went & my car kept stalling bad because of my electrical problems. this video was really helpful because now i know what to do.

[JediMaul]

My grandpa 2008 Nissan frontier 4.0v6 did the same thing after he the replaced upper o2 sensor. So I took a look at it yesterday saw where it started. It seems that the harness that controls the coil packs is what started. I figured that something had grounded and started a spark. I couldn’t get anything from his meter lol bc it was cheap. But this is very helpful and I’m going to check the grounds.

[-matic]

My ecu and ignition coils keeps frying, and the fan comes on when car is off by just putting the key to the on position ? Can you please help me

[DEATHWISHVQ]

this might help someone: I was having a high idle issue, I was being told could be a vacuum leak could be bad throttle body could be bad maf sensor blah blah. Changed my battery, did a idle relearn, fixed.

[jetsantiago]

Works for my nissan cube. Thanks for the info.

[christiansupnet]

I have this issue with only the passenger side ignition coils supplying no spark. I still have the original grounds in place. You believe adding these extra grounds can help this? For those reading, everything is changed, such as spark plugs, ignition coils (hitachi), and EGI harness that controls coil harness for cylinders 1 and 3. As a result car starts, but will run till stall cause of a p0300 code. Right now, fuel isn’t burning on passenger side cause of no spark. After you installed grounds, did you have to buy a new set of coils again for install?

[yahuahs_girl]

Thank you for posting this video! Be blessed!🎉

[Ulove]

My battery fuse keeps blowing. That extra thing we have on the pos battery post that has 5 fuses. The single one fuse by the post keeps blowing. Will this help stop that from blowing?

[aldawson]

Hello just wondering after this video have you ran back into the problem im actually dealing with it now on my FX35 went thro 2 coils #3 almost burning completely up ...i added a new ground to the passenger side but haven't had time yet to test out ...

[jmcvq]

My fx35 is burning coils 3 & 5 this is the second time it happened I'm going to try this and see if it solve the problem and thanks for the info...

[-matic]

What’s a cheap scanner I can use to program a used ecu I got from junk yard. What would I need to marry or code so that everything works right ?

[andrewjordan]

Could you please show where the 3rd ground you installed goes? I think that will solve my problem. Thank you

[flyingfishflftyfifty]

What are the torque specs when you replace the bolts back on the timing chain cover?

[NeoAndersonReloaded]

I had this problem. Had to sell the car. 212k miles. Was burning the coils packs after driving a mile. A mechanic told me its a ecu or groundin problem. By then I was feld up.

[samwilliam]

damm, imma try this this could solve my issue been having for a few months... more of the idle side problem / hestiations

[wpafreddy]

Just curious what Was the idling part of the problem, rpm lower than normal?

[TheStOpHeRG]

Thank you much for the video solved my problem

[JavierHernandez-ebii]

Hi so just by putting new ground cable it solved your problem because my car have similar symptoms my idle Is bad I replaced 2 mass airflow sensors.

[DTUFINOPhotography]

are you grounding strapts just connected to any random hole, or did you connect it to a current ground and then grounded to chasis?