Getting Started With Fusion 360 - Pipe Tutorial

Learning Fusion 360? Need to learn how to build curved shapes like this pipe example? This tutorial will show you how.

🎥Watch Next

⚡Subscribe To Get The Latest Videos
💪🏼Support Me On Patreon

___________________________________________________________________
#Fusion360
#Fusion 360 Tutorial
___________________________________________________________________
DISCLAIMER
This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.

[walterpickford]

At last a tutorial delivered at a sesnsible pace that people can follow. THANK YOU.

[LouAdzima]

Sure, it's easy when YOU do it! Thanks.

[Bosbulls]

Thanks. Again a nice short tutorial that's loaded with tips.

I would go for a similar approach, but not doing the inner circle. Sweep the solid body and then use the Shell command to hollow the tube.

As always with Fusion 360, many way to skin a cat.

[JasonTurkMusic]

Another option would be to make a midplane between the two faces and mirror the flange to the other end using that plane. Only really useful if both arms are the same length though I suppose! Plus your method allows for teaching dimension copying! 😊 Thanks for all your videos! It was great to get me started!

[ivanvalkanov]

A great tutorial stacked with tips, thanks!

[masood]

thanks for share
u forgot make the chamfer command on the top of the 2 Circuit slot said
Thanks again that was helpful .

[zep]

Love your videos . I struggle with lofting from one plane to another, top plane to a side plane using guide rails . The struggle is real 😱

[rebe]

What EXTREMELY BAD! Do don't tell WHAT YOU ARE DOING AND HOW!!