Rotten wood repair

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

Quick tip, prime the bottom of the new piece of wood before installing. It will prevent from rotting again or use clear silicone to stop water from getting in from the rain😊

sparnt
Автор

It always amazes me how talented people can be. ❤😊

cattmahal
Автор

Very well done. Clean repair. This just reminded me what i need to do at my house

mrrolo
Автор

Nice work. I have done the same repairs at my house. I saw nothing wrong with it. Repaired without disturbing the rest of the perfectly fine door jamb. 😊

donaldsperring
Автор

Very nice. I did a similar job on both sides of a door jamb a few years ago and after painting people could not tell it was repaired. Great job my man.

michaelobannion
Автор

Some homes have a hundred of these repairs it’s either spending thousands or hundreds, this is a great example.

hectorgarcia
Автор

Nice job..but repoint brickwork first otherwise water will get in and rot wood again.

rogerpeachey
Автор

Какая экономия!😂.у нас бы заменили бы весь брусок или полностью дверную коробку.

bregims
Автор

I've done the same thing 15 years ago and it's still holding.

rockyblake
Автор

I did the same in my house ten years ago, but I used PVC for that bottom section.

gusuave
Автор

Love to see the Old generation tricks Being taught and passed forward. Awesome 👌

jorgevera
Автор

Rock Hard is a Bee-Ouch to sand. Make it smooth as possible before it sets.😉. Bondo body filler, auto shops, quicker and holds just as well. Bondo works very well with concrete repairs too.🤘.

djoswald
Автор

Its also important to use correct paint, if its outdoor, use paint for wood that has protection in outdoors

rolandtoman
Автор

I like that bondo trick you did where you let it get to that magic moment before it hardens then take away the excess. It makes it so much easier to sand.

martinjaramillo
Автор

Use vinyl to replace, and also fix the mortar missing in the brick.

ForexAlien
Автор

It’s a good patch, but I just would’ve put a whole new board in

therarebreedstherarebree
Автор

Very nice. I did a similar repair but I used pvc. I had several to do so I bought the pvc moulding.

williambranham
Автор

Did the same thing last year using the sane type of tool and sealed the whole thing with a resin that turned the wood weatherproof. The multitool took half a day off the job and the repair survived flooding this winter.

obi-ron
Автор

Brilliant and inspirational vid. Perfect length to make the point and excellent tune
Thank you.

theyrenuts
Автор

I’ve done this repair many times with no power tools, just a sharp saw and chisels. Oh and if you do this repair leave a larger gap between the new piece and the floor. Once you’ve painted it put a bead of frame sealant around the bottom to fill the gap.

TheMazza