How to Fix and Replace Toilet Fill Valve

Показать описание

#glacierbay #toiletleak #dualflushtoilet #howto #fillvalve #toilet
How to Fix and Replace Toilet Fill Valve

You can follow me on

===========================================================
*** You can use those links below to purchase now on Amazon: ***
That's a way for you to support this YouTube channel, so thank YOU for using those links.

*********************************************************************************
*********************************************************************************

*** My Production Gear: ***

*** As an Amazon Associate I earn from qualifying purchases. ***

Рекомендации по теме

Комментарии

Not only is this the same toilet as mine, you also have the *exact* same orange cat wanting to be involved. How funny.
Thanks for explaining the height adjustment, thats what I was looking for.

darrenprentice

Very thorough, detailed and clear instructions. Thanks for sharing

BlazerKL

I came hoping to see how to open the top and replace the gasket but since you had trouble getting that part I will just replace mine with a Fluidmaster filler now, this one is not as good of a design. I stayed for the cat and great quick how to!

whattheschmidt

Thank you! This was very helpful. I have the same model toilet and did not know what to do before seeing this video.

mthompson

Масик научил чинить толчок, такой зая 💕

jackignatev

This video was very helpful! I had the similar model R&T a2417 valve, all new to me. it was leaking all over and the water would not stop running. I am used to using Fluidmaster products and didn't know if it would work with this "dual flush" thing but it works just fine. I got a fluidmaster valve for 10 dollars usd at ACE, the salesman cautioned to be sure the new one would fit the tank (watch height and width) but otherwise connect it and will be back up and running. the fluidmaster came with a new hose, clip, and retention ring. This video shows the same steps except underneath the tank the retaining nut was hard to remove. I used pliers and turned the valve counter/clockwise to loosen...keep a small pan and towels to catch water, after installing the new valve, you play with the water level setting and good to go.

Billy-homs