Strain Gauge Installations with M-Bond AE-15 Adhesive.

Показать описание

M-Bond AE-15 Adhesive requires moderately elevated curing temperatures, and is recommended for critical installations, such as strain gage transducers, where zero shift and hysteresis must be minimized. The AE-15 system is also useful with high elongation strain gages at strain levels up to approximately 10% to 15% at +70°F [+20°C], and at strain levels up to 15% at +200°F [+95°C].

M-Bond AE-15 from Micro-Measurements is a robust strain gage adhesive used for permanent installations. It is also sometimes used as a rugged protective coating.

OTHER ACCESSORIES USED IN AN M-BOND AE-15 INSTALLATION:

• CSM Degreaser or GC-6 Isopropyl Alcohol
• Silicon-Carbide Paper
• M-Prep Conditioner A
• M-Prep Neutralizer 5A
• GSP-1 Gauze Sponges
• CSP-1 Cotton Tip Applicators
• PCT-2M Gage Installation Tape
• HSC Spring Clamp
• GT-14 Pressure Pads and Backup Plates