filmov
tv
Strain Gauge Installations with M-Bond 200 Adhesive.
Показать описание
M-Bond 200 adhesive is compatible with all Micro-Measurements strain gages and most common structural materials. Coming soon to our MM online shop (July 2020):
Micro-Measurements Certified M-Bond 200 is an excellent general-purpose laboratory adhesive because of its fast room-temperature cure and ease of application. When properly handled and used with the appropriate strain gage, M-Bond 200 can be used for high-elongation tests in excess of 60 000 microstrain, for fatigue studies, and for one-cycle proof tests to over +200 °F [+95 °C] or below -300 °F [-185°C]. The normal operating temperature range is -25° to +150°F [-30° to +65°C].
When bonding to plastics, it should be noted that for best performance the adhesive flowout should be kept to a minimum. For best reliability, it should be applied to surfaces between the temperatures of +70° and +85°F [+20° to +30°C], and in a relative humidity environment of 30% to 65%.
M-Bond 200 catalyst has been specially formulated to control the reactivity rate of this adhesive. The catalyst should be used sparingly for best results. Excessive catalyst can contribute many problems; e.g., poor bond strength, age-embrittlement of the adhesive, poor glueline thickness control, extended solvent evaporation time requirements, etc.
For proper results, please use the following qualified Micro-Measurements installation accessory products.
• CSM Degreaser or GC-6 Isopropyl Alcohol
• Silicon Carbide Paper
• M-Prep Conditioner A
• M-Prep Neutralizer 5A
• GSP-1 Gauze Sponges
• CSP-1 Cotton Applicators
• PCT Gage Installation Tape
Micro-Measurements Certified M-Bond 200 is an excellent general-purpose laboratory adhesive because of its fast room-temperature cure and ease of application. When properly handled and used with the appropriate strain gage, M-Bond 200 can be used for high-elongation tests in excess of 60 000 microstrain, for fatigue studies, and for one-cycle proof tests to over +200 °F [+95 °C] or below -300 °F [-185°C]. The normal operating temperature range is -25° to +150°F [-30° to +65°C].
When bonding to plastics, it should be noted that for best performance the adhesive flowout should be kept to a minimum. For best reliability, it should be applied to surfaces between the temperatures of +70° and +85°F [+20° to +30°C], and in a relative humidity environment of 30% to 65%.
M-Bond 200 catalyst has been specially formulated to control the reactivity rate of this adhesive. The catalyst should be used sparingly for best results. Excessive catalyst can contribute many problems; e.g., poor bond strength, age-embrittlement of the adhesive, poor glueline thickness control, extended solvent evaporation time requirements, etc.
For proper results, please use the following qualified Micro-Measurements installation accessory products.
• CSM Degreaser or GC-6 Isopropyl Alcohol
• Silicon Carbide Paper
• M-Prep Conditioner A
• M-Prep Neutralizer 5A
• GSP-1 Gauze Sponges
• CSP-1 Cotton Applicators
• PCT Gage Installation Tape
Комментарии