How to install an external and internal cable

Hi, this video explains how to run an external and an internal cable. The same technique applies to telephone, data, aerial, satellite and most low voltage cables. Hope you enjoy the video and please subscribe to my channel for more 'how to' videos.
Many thanks Vince
To visit my ebay shop please click this link

[AcelectricsCoUk]

At the beginning I started watching this thinking I knew it all already as I've been a qualified spark for a year now, but as the video went on I actually learnt loads of tips! Thanks man!

[AgentSmithK]

3:32 “damaged the brickwork a bit” a good way to mash up your wall. Glad I watched this before trying.

[ardaonder]

Just fast forward until the kid stops shaking the cam. Got some good points. (Actually mate, you should put something like this in the description.)
Fastening cables with nail clips- 1:30 - Follow the mortar lines. Put the nails below the cable.
Drilling - 4:20 - 18 inches long 8mm drill for phone cables, and drill downwards from inside out using hammer mode.
Using pin plugs on tougher surfaces - 9:06
Thumbs up.

[arkatoz]

Very useful video, especially the tip about angling the drill hole downwards. Thanks. Need to sack the cameraman though!

[rusrus]

Great video ! this is how a teaching video should be presented.."confident and clear.. " well done

[mbsoysal]

The presenter gives good tips, I learned a lot. Thanks for the video.

[GegoXaren]

For inside jobs:
I like those cable ducts with adhesive on the back (you need to screw them in place anyway), especially if you run multiple cables. It looks better than "raw" cable and are often not that eyecatching.

[clarencevickrot]

Wear those safety glasses. You never know....

[w]

Fabulous! Cheers Vince! You are the go to guy for when I need to know something to so with extensions and installs. Much appreciated for the videos!

[Xoletta]

Great video with lots of great tips. And really loving that English garden in the background, too!

[theoffroader]

Nice informative video mate, and good to see you advocating the use of safety goggles etc when drilling. However using drills, hammers, and sharp objects such as in the cable pins is a definite no no when you're doing it in bare feet! ;)

[ammarkuzu]

Great tips guys. Really dont understand the dislikes.. Thanks a lot for your efforts and time. Much love.

[CurvedSlightly]

Yeah, those pin plugs are the balls! Saw a BT 'engineer' use them and asked for a handful.

[ChrisEpler]

Internal for baseboards if you're in a room with carpet you can usually tuck the cable UNDER the baseboard as there is a gap for the carpet and carpet tack. Then it's 100% hidden and doesn't even need any fastening.

[juanlamas]

if am running sucurity camaras. would the cables be ok vs the sun and rain? Am doing it on my app building and it would be easier to run the cables on the roof.

[freedomisfromtruth]

The most important question is - what is that large mini car in the background, is it RC or kids type?

[JamesZ]

Great video! Never knew you could hammer nails into mortar

[fighterscorner]

Great video loads of tips thank you so much vince I am putting a enthroned cable through to my gym in back yard

[youtubegoogleareislamaphob]

Good video but the person holding the camera was asleep did a really poor job, i can only put it down to the person was blind & deaf

[rockywr]

What is the best procedure for feeding the cable in from the outside across the 'cavity' to the interior especially nowadays as most people may have the extra cavity insulation those polystyrene beads etc.. ?