How to make a Tapering Jig / DIY table saw jig

In this video I go over how to build a Tapering Jig.

Jig Measurements

Body - 30" x 12"
taper adjustment rail - 3 1/2" x 28"

Items you will need for this jig (affiliate links included)

Other tools used in this video

FILMING EQUIPMENT

Social media:

Website:

[WalkersWoodworks]

Be sure to check out my website for other Projects, Blog posts, Plans and Tools I use! Walkersww.com

[maxhurst]

Thank you, after working my life time in steel and industrial piping I finally decided at 75 to retire and take up wood working as a total beginner and needed to miter some short table legs for a small bedside table with limited tools. Your video was just the fit for me and enjoyed your presentation.

[JustinShaedo]

This seems like a superior approach to make a jointing jig too, just square the settings. Great work!

[danadams]

Thanks. Made it and it’s very satisfying the cut and accuracy of it.

[jayking]

Fantastic video. This requires more hardware than other builds but doesn’t require a router table. I don’t have a router table, making those other builds very difficult. Thank you

[nonexman]

Big thanks for the information and good presentation. A number of years ago, I used one of those two-part taper jigs, and as I was using it, I said to myself: "Dang, this seems very dangerous." But I went ahead and finished the job. Then, just the other day, I had to use it again. I had the same reservations about using it. So, I didn't. I then went online to see what options were out there. The basic idea you have is reasonably common, but your presentation was very easy to follow. Plus, I had all the parts already — I didn't have to buy one thing (except for a 4' T-bar that I was saving for another project, but that's another story). I did make two changes from your approach: 1) I did not drill two holes and remove everything in between as you did for the top angle piece. I did that on my router table in three passes of different heights. In addition, I placed the groove for the T-bar by the same technique (start about four inches in, and run along to the other four inches in). Much easier. The second variation I did was to add a miter guide. I felt that relying upon the fence is problematic because the fence can be off a tad here or a tad there. After a while, the edge has drifted around to become meaningless as a guide. Using a miter guide completely limits this drift. Again thanks!

[zackroloff]

This is a great tutorial. Thanks for your videos, they've helped me a lot as I'm slowly learning the craft!

[snowystuds]

Everything I like about a diy video. Powerful saws. Useful voiceovers. Super fast marking and movements. I always feel like anything is possible after a good DIY!! Ha. Nicely done.

[PenaltyBoxWoodshop]

Nice video and I like the hold downs. Simple and useful!

[jenniferbecnel]

I'll be making this this weekend!

[thedoorguycharlie]

Good video, nice build. Nice to see someone more local to me. I'm down in Rocklin.

[swishair]

awesome vid, I've been wanting to make a jig like this, and with your easy-to-follow great explanation and directions, I think a beginner like me can do this. Thanks again

[IEnjoyCreatingVideos]

Nice tapering jig Brandon! Thanks for sharing the video with us.👌👍😎JP

[freshoffthesaw]

Going to have to make one of these! Great build!

[ladykenja]

- Thanx 4 sharing. VERY helpful. You made it seem "do-able."

[hugomaderas]

Hoy vi, el video y muy bueno me suscrivi y vi más de los vídeos q tiene interesantes gracias por Compartir sus conocimientos estoy aprendiendo el arte d la madera y me vienen bien estas plantillas aunque no entienda el inglés boy a tratar d hacerlas Saludos d cali colombia

[RoninX]

Could you also use this jig for straightening a board I.e. joiner sled jig?

[everabeast]

If I have a smaller table saw like the DeWalt with the 8 and 1/4-in blade does the length change and/or the width? Also do the other dimensions change as far as the slotted grooves you cut for the fence?

[msmifing]

The 5-star handle you've recommended in your parts list. Is that meant to be the quick release version?

[jdgodwin]

This looks simple but effective! 👍🏻

Is there a reason you chose not to use a mitre slot and instead use the fence?